Common questions

Where do I find HBA details in Windows?

author 0

Where do I find HBA details in Windows?

Steps

  1. Open the Computer Management window. For.
  2. Double-click Device Manager. A list of installed devices displays.
  3. Expand Storage controllers and double-click the appropriate HBA. The Properties dialog box for the HBA is displayed.
  4. Click Driver.
  5. Obtain the latest supported version from the Emulex or QLogic website.

How do I find my WWN number in Windows 2008?

Obtaining the WWPN using Storage Explorer

  1. In Windows Server 2008 or Windows Server 2008 R2, select Start > Administrative Tools > Storage Explorer.
  2. Expand the Servers node of the Storage Explorer console tree and locate the HBAs.
  3. Record the value of the Port WWN field for each HBA port.

How do I use Fcinfo on Windows?

Steps

  1. If it is not already installed, download and install the fcinfo.exe program from the Microsoft Download Center.
  2. Open a command prompt and enter the following command: fcinfo /ports /details.
  3. Record the value of the Port WWN field for each HBA port.

Where is WWN on Windows Server 2019?

run “fcinfo” command in Command Prompt. It will show up HBA connected to the server with WWN. Few model dependent utilities are: HBAnyware utility (click here to download)

How do I find my WWN number in RHEL 7?

If you have more number of hosts file under the directory /sys/class/fc_host, then use the command for each hosts file by replacing the “host0”. From Redhat Linux 5.4 onwards, redhat introduced “/usr/bin/rescan-scsi-bus.sh” script to scan all the SCSI bus and update the SCSI layer to reflect new devices.

Where is WWN on Windows server 2019?

How do I find my WWN virtual machine number?

2. How to find HBA WWN via ESXi Shell / CLI:

  1. Connect to ESXi shell either via putty/SSH or DCUI (Direct Console User Interface) / server console.
  2. Run ‘ls /proc/scsi/’ and check the folder names:
  3. Look for a folder like ‘qla2xxx’ – QLogic HBA, ‘lpfc820’ – Emulex HBA, ‘bnx2i” – Brocade HBA;
  4. Run ‘ls /proc/scsi/qla2xxx’.

Where Is My WWN number vSphere?

How to find WWN (World Wide Name) in Windows Server?

In Windows Server 2008 or 2008 R2, we can use “Storage Explorer” to locate World Wide Name (WWN). Started from Windows Server 2012, “Storage Explorer” was removed. To find WWN in Windows Server 2012 or 2012 R2, we can use PowerShell to perform “Get-InitiatorPort”.

How to get WWN number on Linux?

World Wide Name (WWN) is required to create zoning on Fiber Channel Switch and storage allocation to server. There are two ways to extract WWN number on Linux which are follows: . Using Internal Linux command . Using systool utility In this guide, we’ll see both of them one by one.

How to find the WWN in Windows Server 2012 R2?

“Storage Explorer” Starts from Windows Server 2012 was removed. You can use PowerShell to find the WWN in Windows Server 2012, 2012 R2 and 2016 as shown below. Run ” Get-InitiatorPort ” command from PowerShell prompt (Click on picture below to enlarge it).

Can you find WWN in device management?

Can you find anything in Device Management? You should able to find a name and its GUID in Properties of a disk in Device Management. Based on my knowledge, to find WWN in Windows Server 2012 or 2012 R2, we can use PowerShell to perform “Get-InitiatorPort”.

author

Back to Top