What is R407F refrigerant?

What is R407F refrigerant?

R407F refrigerant gas is a zeotropic HFC blend that is suitable for use in low and medium temperature applications such as commercial refrigeration. It is a suitable retrofit for R404A systems with similar performance, a lower GWP (up to 40%), and up to 15% improved energy efficiency.

What is the difference between R407C and R407F?

R407F is a mixture of R32, R125 and R134a, that refers to the R407C. But it has a pressure that best fits R22, R404A and R507. Although, R407F was originally intended as a replacement for Halon R22. R407F is based on the same molecule and has the same composition as the Freon R407C.

Is 407f a replacement for R22?

R407F is a blend of HFC refrigerants designed to replace R22, R404A and R507 in low and medium temperature refrigeration applications. R407F has very similar properties to R404A. There is no single product that can replace R22 in all applications.

What is R407A used for?

Refrigerant R407A is commonly used in low and medium temperature refrigeration applications. It has earlier been used as a substitute for R22, for example. R407A is an excellent and energy-efficient low-GWP gas suitable for many R404A systems. Energy savings of up to 10% have been reported in many systems.

Can you mix R404A and R407F?

3. Caution: R407A, R407F, R448A or R449A should not be mixed with any other refrigerant! 4. The higher discharge temperatures of R407A, R407F, R448A and R449A, particularly with lower evaporating temperatures, should be evaluated.

What is the GWP of R407F?

1824
Sold by Honeywell as Performax LT, R407F has a GWP of 1824.

IS 407C a low temp refrigerant?

Freon™ 407C refrigerant performs similarly to HCFC-22 under evaporator temperatures ranging from –7 to 10 °C (20 to 50 °F). It is designed for use in new equipment and as a service refrigerant for existing HCFC-22 air conditioning, heat pump, and medium temperature refrigeration equipment.

Can you mix MO99 with R22?

No. Freon™ MO99 should not be used to top off R-22 systems. Mixing refrigerants is not recommended. R-22 should be recovered using appropriate equipment and managed according to U.S. EPA guidelines specified in Section 608 of the U.S. Clean Air Act.

Can I put 404A in place of R22?

R404A and R507A as substitutes for R22 and R502. These blends are chlorine free substitutes (ODP = 0) for R22 as well as for R502 in medium and low temperature ranges. The efficient application of single stage compressors with low evaporating temperatures is therefore guaranteed.

Can R407A replace R22?

R407A is a HFC blend, used as a replacement for R22 and R404A in low and medium temperature supermarket applications. Due to its moderate Global Warming Potential (GWP) it is also considered as an interim replacement for R404A and R507 in existing and new applications.

Is R407A flammable?

R-407A is not flammable in air under ambient conditions of temperatures and pressure. However, this material will become combustible when mixed with air at elevated pressure and/or temperature in the presence of an ignition sources.

Can R407 replace r404?

The changeover from R404A to R407A is said to relatively easy and in many cases, the original oil can be used. R407A, like other gases in the R407 series, is a zeotrope and must be charged in the liquid phase to prevent fractionation. The glide requires a minor adjustment to the expansion device.