How much HP do you need for a 10 second car?
How much HP do you need for a 10 second car?
For a sub 10 second, 1/4 mile run for this car you will need around 750bhp and 650ft/lbs (ET 10.98 at 137mph). For a lighter car the power figure is lower but for a heavier car the power requirement goes up. Trim the weight by around 240lbs and you’ll be hitting a 10.48 second 140mph time.
What makes a 10 second car?
So what exactly is a ten-second car? Quite simply, it’s a car that’s fast enough to drive a quarter-mile drag race in ten seconds or less. The quarter-mile drag is the main kind of race seen in the first movie, immortalized by Dom’s famous “I live my life a quarter-mile at a time” line.
What is an 8 second car?
Find cars that accelerate to 60 miles per hour in eight seconds. These days, “8 second cars” are fairly average relative to other car acceleration times. Though, an eight second vehicle will still have enough ‘get up and go’ for many drivers.
What is a 6 second car?
6 seconds is what most 1500 trucks can run, so not to fast. Mid 4 is the 90s 6 second.
Which car has the fastest 0-60?
The Koenigsegg Gemera is the world’s quickest production car that hits the 0-60 mph mark within 1.9 seconds. It’s the very first four-seater by Koenigsegg and the world’s first Mega-GT that weighs 4,079 pounds.
How fast can you go with 1 horsepower?
A 1-horsepower engine couldn’t maintain more than 20 or 30 mph in a normal car, and you could never turn on the headlights or the air conditioning. The other problem is acceleration. The bigger the engine, the faster you can accelerate from zero to 60mph.
Is it possible to build a 10 second car?
Although professional drag racing cars can do the quarter mile in less than half that time, 10 seconds remains a reasonable goal for serious car tuners. Having a 10 second car puts you in a rather exclusive set of road legal cars. Find out what it takes to build a 10 second car.
How much hp do I need to run a 10 second car?
There are a few assumptions made and each of these will have a bearing on the results to a larger or lesser degree.For a 10 second car we recommend the following ratio as a good starting point :- 650bhp per 1000kg So for a relatively heavy car of around 1600kg, such as a Supra or GT-R, you would need to aim for 750 bhp
How can I break the 10 second barrier in a car?
Breaking the 10 second barrier in this car will need around 1100bhp and 1000lb/ft of power – so quite a big hike. Weight reduction is usually the cheapest and best option. Increasing the power is a secondary consideration. Remember, grip, transmission, clutch and handling all play their part.
How do you hold on to a V8 engine?
Happel looked to the right and placed both hands on the steering wheel, “Hold on,” he said. The 364 cubic-inch GM V8 instantly overpowered the rear tires and a intercooled turbocharger kept them spinning in the middle of Allentown traffic.
