What kind of fluid do I put in my trim pump?
What kind of fluid do I put in my trim pump?
SAE 10W30 Automotive Oil A substitute for outboard tilt-trim oil is automotive oil with SAE 10W30 specification. For example, it is recommended that you use SAE 10W30 oil in older Mercruiser brand trim pumps.
What color is power trim fluid?
Hydraulic fluid can be a burgundy or clear color and has an extremely low viscosity, so if there’s any way for it to leak out of the system, it will. Sometimes the actuator ram seals will leak and the fluid will be around the base of the ram, or drip down around the power tilt and trim motor.
What does a ignition protector do?
These parts are designed to keep sparks from escaping, preventing the ignition of gasoline or propane vapours in case the engine backfires.
What kind of fluid goes in a tilt trim motor?
hydraulic fluid
An electric pump runs the hydraulic fluid in the power tilt and trim system, and if you get a leak, the hydraulic fluid will ooze out and allow air to replace it in the system. When that happens, the motor will usually tilt all the way down and will not go up or will stick.
Should I put hydraulic steering on my boat?
A hydraulic steering system is recommended for larger boats 10 metres and above in length and those moving at high speeds. The torque (or force) of a large outboard motor means it can be difficult to bring out of a turn or veer sharply from heading straight with mechanical steering.
What is this j1171 fluid?
J1171 is not a fluid, nor a standard for oil, it’s a standard for marine electrical items. http://standards.sae.org/j1171_200406/ What reservoirs are you talking about? If you don’t know what they are called, post a picture. Over the years, there have been many different reservoirs, styles, and fluids in them.
What does SAE j1171 mean?
SAE stands for Society of Automtive Engineers. Basically it’s a society of engineers that is a stamp of approval. Yes, the Bennett trim tab pumps use ATF. The J1171 sticker just shows that the motor and solenoids meet the SAE spec for the unit to be in the engine compartment. You must log in or register to reply here.
What does SAE mean on starter fluid?
Over the years, there have been many different reservoirs, styles, and fluids in them. Basically, Mercruiser doesn’t recommend ATF in anything, so pictures are recommended. Yes, it is that label you should see on your starter and alternator . . . SAE stands for Society of Automtive Engineers.
