Useful tips

What port does SonicWall site-to-site VPN use?

author 0

What port does SonicWall site-to-site VPN use?

UDP 500
Description

Description Protocol Port number
VPN ESP (Protocol 50)
VPN UDP 500
VPN UDP 4500
WAN Failover and Load balancing – Probing TCP 50000

How do I configure a site-to-site VPN between SonicWall and Windows Server 2012 r2?

  1. Login to your SonicWALL at the Central Site.
  2. Click on VPN->Settings.
  3. In the Unique Firewall Identifier box, enter CentralSite and click Apply.
  4. On the VPN->Settings page, click the Add… button.
  5. Click OK.
  6. Click on VPN->DHCP over VPN. Select Central Gateway from the dropdown and click the Configure…

What is site-to-site VPN how it works?

A site-to-site Virtual Private Network (VPN) provides this by creating an encrypted link between VPN gateways located at each of these sites. A site-to-site VPN tunnel encrypts traffic at one end and sends it to the other site over the public Internet where it is decrypted and routed on to its destination.

Which ones are two main types of site-to-site VPN?

There are two basic VPN types which are explained below.

  • Remote Access VPN.
  • Site – to – Site VPN.
  • Internet Protocol Security or IPSec:
  • Layer 2 Tunneling Protocol (L2TP):
  • Point – to – Point Tunneling Protocol (PPTP):
  • Secure Sockets Layer (SSL) and Transport Layer Security (TLS):
  • OpenVPN:
  • Secure Shell (SSH):

What is the difference between tunnel interface and site-to-site?

A site-to-site VPN does not give you that type of redundancy since the network is configured in the policy itself. Tunnel interface offloads that configuration from source network to destination network to a route policy. Once that’s on, you can go to the Network Routing window and switch the view to Advanced Routing.

What are the types of site-to-site VPN?

Types of Virtual Private Network (VPN) Protocols:

  • Internet Protocol Security (IPSec): Internet Protocol Security, known as IPSec, is used to secure Internet communication across an IP network.
  • Layer 2 Tunneling Protocol (L2TP):
  • Point–to–Point Tunneling Protocol (PPTP):
  • SSL and TLS:
  • OpenVPN:
  • Secure Shell (SSH):

What port does site-to-site VPN use?

To make your Site-to-Site VPN service available, you should keep ports 500 and 4500 (for IPsec protocol) open on both of your Synology Router devices.

How to configure a VPN policy on site B SonicWall appliance?

Configuring a VPN policy on Site B SonicWall Login to the Site B SonicWall appliance and Click Manage in the top navigation menu. Click VPN | Base Settings page and Click Add button. The VPN Policy window is displayed.

How do I configure a VPN on the SonicWall NSA 2400?

SonicWall side configuration The screenshots below are from the web interface for the SonicWall NSA 2400. Go to the VPN lists to add another VPN (Usually VPN|Settings on the menu). Add a new VPN connexion (the Add button). NOTE: For the above you’ll need to configure address objects for the Local Networks and Remote Networks.

Which SonicWall firewalls are compatible with IKEv2?

All Gen5, Gen6, Gen6.5 SonicWall firewall models can be configured for Site To Site VPNs with IKEv2, from the lower TZ models up through all higher models: NSA, NSa, SuperMassive, and NSsp product lines. It is also supported on almost any IKE VPN appliance from other major vendors.

How do I create a VPN tunnel with SonicWall?

You can use the default SonicWall generated Preshared Key. I know my Remote Peer IP Address (or FQDN): If you check this option, this SonicWall can initiate the contact with the named remote peer. If you do not check this option, the peer must initiate contact to create a VPN tunnel.

author

Back to Top