How big should a pump house be?
How big should a pump house be?
The 8 foot by 8 foot size shown in Figure 1 is ample for most farms; however, the size can be adjusted to suit specific needs. A pump house should be only used for housing water facilities and equipment. It should not be used to store chemicals, livestock feed, etc.
How does a pump house work?
The pump is powered by an electric motor that drives an impeller, or centrifugal pump. The impeller moves water, called drive water, from the well through a narrow orifice, or jet, mounted in the housing in front of the impeller. Its function is to slow down the water and increase the pressure.
Do I need a well pump house?
Same goes for anyone living in a rural area with well water or an irrigation system. For this reason, it is important to have your pump house built or repaired long before winter comes. A pump house is an outbuilding that keeps your water system’s parts that reside outside of the well from freezing.
How do you winterize a pump house?
How To Winterize Your Water Well Pump
- Turn off the power to the pump.
- Open a faucet to drain the residual water in the pump.
- Disconnect draining pipes and other units from the pump so you can be sure all water drains from the pump properly.
- Use an air compressor to blow out any additional water.
Can a well pump freeze?
Water pumps in temperatures of 40 degrees or below can also freeze. However, this is rare as most well pumps are below the ground or housed in special “well houses” to protect them from the cold.
How deep does a well pump work?
Deep-well jet pumps are also above the ground, but they draw water by using two pipes. One of these pipes draws water out of the well, while the other pushes the water up. A deep well jet pump sucks up water from depths as great as 110 feet, and a foot valve is necessary for priming the pipe.
How do you build a pump house from 2×4?
Build a basic square frame that will fit the dimensions of the front opening. Line it with the 2x4s as you did with the walls. Then, attach two door hinges to one side and secure to the front of the pump house. Attach a handle; you can make a simple one from a block of wood.
Can you make a house out of a water pump?
This strong, sturdy building will save you money in the long run, protecting your pump from potential costly maintenance. Depending on how elaborate you want to make your house and what your current needs are, you could turn your pump house into a storage shed, outdoor bathroom, or even a workshop.
How to secure a pump house?
Then, attach two door hinges to one side and secure to the front of the pump house. Attach a handle; you can make a simple one from a block of wood. Add a clasp to keep the door secured. While this is a simple door, you can experiment by building more advanced doors for a fancier or more-secure pump house.
Should you build a pump house with a removable roof?
For this reason we recommend that, if possible, you build your pump house with a removable roof. Before you spend your next six weekends transforming your unsightly well equipment into a hand-crafted masterpiece, plan ahead.
