Useful tips

How do I turn off HP ProCurve Switch?

author 0

How do I turn off HP ProCurve Switch?

The most graceful way to shutdown an E-series Procurve switch is to do a “write memory” command at the CLI, (alternately exiting the menu interface or committing a change on the WebUI), wait for the command to complete, then pull the plug. If you want to reboot, you can do a “reload” or a “boot” command.

How do I enable SSH on HP?

How to: Configure SSH on HP ProCurve Switches

  1. Step 1: Log into the Switch. Log into the switch’s Web interface using an account with read-write permissions.
  2. Step 2: Create a Certificate.
  3. Step 3: Generate a Private/Public Key pair.
  4. Step 4: Enable SSH.

How do I reset my HP ProCurve Switch?

To initialize, or reboot, a ProCurve Switch, perform the following steps:

  1. Press the small, recessed Reset button on the face of the switch.
  2. Issue the command, reload from within the CLI.
  3. Or, issue the command, boot system flash to reboot into either primary or secondary flash.

How do I check my ports on my HP switch?

To check the mode setting for a port on the switch, use either the Port Status screen in the menu interface or show interfaces brief in the CLI (see Viewing port status and configuration (CLI)).

How do I enable Web interface on HP switch?

To enable web login, log in to the device via the console port, and perform the following configuration: • Enable HTTP or HTTPS service • Configure the IP address of the VLAN interface • Configure a username and password The device supports the following web login methods: • HTTP login: • HTTPS login: The following …

Why is version 2 of SSH implemented on the switch?

SSH is a secure method for remote access to your router or switch, unlike telnet. SSH requires a RSA public/private key pair. SSH version 2 is more secure than version 1. Make sure you have an IOS image that supports crypto features, otherwise you can’t use SSH.

author

Back to Top