What is the brown wire mod?

What is the brown wire mod?

Starts here10:35Ford AWD “Brown Wire Mod” Turn off the AWD System when you want to!YouTubeStart of suggested clipEnd of suggested clip60 second suggested clipThis is a brown wire out if you can see that hold the light a little bit better you can probably seeMoreThis is a brown wire out if you can see that hold the light a little bit better you can probably see the collar there a little bit better but this wire that goes in the back of the transfer.

How do you turn off 4×4 on a Ford Explorer?

The Ford Explorer’s auto 4WD cannot be switched off unless You are willing to modify wiring in the transfer case. The auto button is engaged by data collected from the Explorer’s ABS sensors and other sources that includes steering wheel angle, pedal position, turning, wheel speeds and rates of acceleration.

How do you put a 2010 Ford Explorer in 4 wheel drive?

If you want to switch to 4wd you must come to a complete stop and shift the transmission into neutral. After that just push the 4×4 button.

Can you disable 4WD?

Most modern all-wheel-drive vehicles do not allow the driver to disable all-wheel drive and will permanently send some power to every wheel regardless of driving conditions.

What is Control Trac 4WD?

ControlTrac four-wheel drive is the brand name of a selectable automatic full-time four-wheel drive system offered by Ford Motor Company. BorgWarner calls the system Torque-On-Demand (TOD). ControlTrac was the first automatic system to use software control and no planetary or bevel geared center differential.

Is my Ford Explorer always in 4 wheel drive?

Ford Explorers comes standard in 2-wheel-drive. However, you can configure a 2020 Ford Explorer to have their “intelligent 4-wheel-drive” system. While they do not offer an AWD model, their 4WD system is just as high-tech.

How do I know if my Ford Explorer is 4 wheel drive?

Look underneath your vehicle while it is turned off for the axle shaft. The shaft simply looks like a large bar going from the front to rear axle. If you see an axle shaft running from the front to rear axles, you have an all-wheel drive vehicle.

Can you turn 4WD on while driving?

If you are driving on clear, level roads, you should not be using 4WD. Because these roads provide their own traction, using 4WD can lead to drivetrain binding and can ruin your vehicle. No matter what vehicle you drive, never shift to 4WD when traveling at high speeds or when on dry, level roads.

What is Ford control track?

ControlTrac four-wheel drive is the brand name of a selectable automatic full-time four-wheel drive system offered by Ford Motor Company. BorgWarner calls the system Torque-On-Demand (TOD).

How does torque on demand work?

TOD (Torque On Demand) system, which is superior than existing Full Time 4WD, checks the road surface and vehicle conditions via various sensors and, subsequently, according to the situations and conditions, distributes the most optimal driving force to front wheels and rear wheels by activating the electro-magnetic …