Common questions

What is Cisco default IP address?

author 0

What is Cisco default IP address?

192.168.1.1
Most routers and switches by Cisco have default passwords of admin or cisco, and default IP addresses of 192.168. 1.1 or 192.168. 1.254.

How do I log into Cisco DPC3825?

Cisco DPC3825

  1. Connect your device to your Wi-Fi modem:
  2. Open a web browser and key in 192.168.0.1 in the address bar and press Enter.
  3. Enter the following default settings to access the modem settings and select Login:
  4. Select Setup from the menu at the top of the page.

How do I find the IP address of my Cisco router?

Open any web browser and type in 192.168. 1.1 in the address bar. This should be the default Cisco router IP address and will take you to your Cisco router login page.

How do I login to my Cisco router?

Cisco router login:

  1. Make sure you’re connected to your network.
  2. Open a browser, and go to 192.168. 15.1.
  3. Enter the username and password.
  4. Default login credentials.
  5. Next Up: Speed up your Wi-Fi connection.

What is the default login for Cisco router?

When you access the device, you should be asked to enter a username and password. The default user name of your Cisco router is either “admin” or “cisco”. The default password of all Cisco routers is either “admin”, “cisco” or is a blank field.

What is the default IP for Cisco wap4410n?

IP Address 192.168.1.245 Load Admin
Username admin
Password admin
SSID ciscosb
Users Manual User manual 2 of 2

How do I reset my Cisco DPC3825 router password?

How to Reset your Cisco DPC3825 Modem

  1. Locate the Reset button the back of the modem.
  2. Press and hold the Reset button for 10 seconds.
  3. After 10 seconds, release the button. The modem should restart and the lights will flash.
  4. Once the modem is finished restarting and is online the settings will be back to default.

What is Cisco DPC3825?

The Cisco® Model DPC3825 8×4 DOCSIS 3.0 Wireless Residential Gateway (DPC3825) is a high-performance home gateway that combines a cable modem, router, and wireless access point in a single device providing a cost-effective voice and networking solution for both the home and small office.

How do I find my Cisco IP port?

Perform a show mac address-table interface on the switch that has the device(s) connected to it. Then go to the router for the VLAN specified in the previous command and perform a show ip arp vlan | include . That will give you the IP address for the device.

How do I log into my 192.168 1.1 IP address?

How to Login 192.168. 1.1?

  1. Turn on your router and connect it to your computer with an Ethernet cable.
  2. Open your favorite web browser and type “http://192.168.1.1” into the address bar.
  3. Enter the correct router login/password combination.

How do I reset my Cisco router to factory default?

  1. Prepare the router. Make sure the Cisco router is turned off and the power cord is plugged into both the router and the power source.
  2. Locate the reset button. Look for the small factory reset button on the back of the router.
  3. Use the reset button.
  4. Wait for the reset to complete.

How do I log into my router admin?

Step 1: Open your web browser and type in the IP address of the router (192.168. 0.1 by default). Step 2: Enter the username (admin) and password (blank by default), and then click OK or Log In.

author

Back to Top