How big of a motor can I put on a 16 foot jon boat?
How big of a motor can I put on a 16 foot jon boat?
A 16-foot jon boat has an average weight capacity of 990 pounds and it can carry four adults very comfortably. With his type of boat. It would be reasonable to expect 30 to 35 HP engines to perform well.
How much horsepower does a 16 foot boat need?
To achieve maximum efficiency, you’ll have to give it 50 to 300 horsepower. There’s a range of the required power as you take into consideration the size and usage. An aluminum boat that is 16 feet long needs to have a 60 horsepower motor. Once equipped, it can have a speed of 25 to 30 miles per hour.
Can you put a motor on a jon boat?
If you really want a bargain, consider repowering a used jon boat with a new Mercury outboard motor. These boats rarely wear out, and a new FourStroke Mercury motor from 2.5hp to 40hp will deliver easy starting, great economy and clean, quiet operation, season after season.
What size motor do I need for a 15 foot boat?
Tips for selecting the right size hp for portable outboard motor for your boat.
| Motor HP | Boat length (feet) | Boat length (metres) |
|---|---|---|
| 5hp – 15hp | 8′ – 14′ | up to 4.2m |
| 9hp – 20hp | 11′ – 16′ | up to 4.5m |
| 20hp – 40hp | 13′ – 18′ | up to 5.0m |
| 40hp – 75hp | 14′ – 20′ | up to 5.5m |
How much weight can a 16 foot jon boat hold?
At 16 foot in length a Jon boat can usually hold about 1,000 lbs. An 18 foot Jon boat will hold, on average, about 1,500 lbs. At 20+ feet in length a jon boat is able to hold up to 1,900 lbs of people and equipment.
How much outboard horsepower do I need?
The rule of thumb is based on weight alone, and says you should have between 40 and 25 pounds of weight for each horsepower. For example, a 5,000-pound boat could have an engine with between 125 and 200 horsepower.
Is a 16ft boat big enough?
A 16-foot flat bottom or semi-vee aluminum is fine for fishing small, protected lakes, and for casual weekend action that may include a bit of bass fishing, maybe poling up some crappies or bluegills, and perhaps even a little drift fishing for catfish.
How large of an outboard motor do I need?
What size motor do I need for a 14 foot aluminum boat?
For lighter boats, a motor that produces 8-10 horsepower can get the job done quite easily. But if you’ve got a heavier boat, a 20-horsepower motor will get most any tinnie moving quickly.
Are 4 stroke boat motors better than 2 stroke?
From a cost perspective, a 4-stroke outboard is far more fuel efficient than a 2-stroke. The fuel efficiency of a 4-stroke motor can be 50% better than that of a 2-stroke motor with the same HP. It also generates more torque, making 4-stroke outboards perfect for heavier boats. …
Do Jon boats have titles?
Registration requirements vary from State to State though a common theme is that motorized Jon boats require registration (and sometimes titling) whereas non-motorized Jon boats do not require registration or titling.
Which is stronger fiberglass or aluminum?
Kit Denison: Aluminum is stronger than fiberglass. There is also more flexibility where you want to put the weight in fiberglass. For instance, you could build lighter parts higher up. The heavier weight of fiberglass provides a more stable ride.
What is a jon boat used for?
A jon boat (or johnboat) is a flat-bottomed boat constructed of aluminum, fiberglass, or wood with one, two, or three bench seats. They are suitable for fishing and hunting.
How big are Jon boats?
Jon boats are available commercially between 8 and 24 feet (2.4 and 7.3 m) long and 32 to 60 inches (81 to 152 cm) wide, though custom sizes may be found. The simple design includes an open hull, without a bilge, leaving the ribs exposed.
What is a small jon boat?
Jon boats are small, trailerable vessels generally used for activities such as freshwater fishing. These vessels can range in size, with the smallest current boat listed at 10 feet in length, to the longest vessel measuring in at 24 feet, and an average length of 17 feet.
