How do I make perfect curtains?

How do I make perfect curtains?

How to Make Curtains

1. Cut fabric. Hall recommends adding 7 1/4 inches to both the height and width measurements to account for the top pocket and side and bottom hems.
2. Pin and sew one side.
3. Create lining hem.
4. Sew second side.
5. Flip curtain right-side out.
6. Create rod pocket.
7. Iron.
8. Hang!

What is the formula for making curtains?

There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).

How many yards of fabric do I need to make curtains?

Yardage chart for a standard window PAIR of basic drapery panels @ 2.5x fullness

Finished Length Up To	Solids & Small Prints	Medium Prints (v-repeat up to 12″)
60″ Long	4.5 yards	5 yards
70″ Long	5 yards	5.5 yards
80″ Long	5.5 yards	6 yards
90″ Long	6 yards	6.5 yards

Why do we have to cut the pattern before cutting the fabric?

Why Cutting Fabric Matters Cutting fabric in or out of the pattern borders means your seam allowance will be inaccurate resulting in an item that is the wrong size. All that time you spend sewing is wasted if your beautiful clothing doesn’t fit.

Why is it important to sew cotton cloth before cutting and sewing?

Reasons to Pre-Wash Fabric Before Sewing This means they are soaked in or washed in chemicals that make them look more vibrant and to prevent wrinkling. Avoid Shrinkage Later: Fabrics like cottons always shrink, so if you are making a garment you want it to fit after the first time you wear it.

How do you make easy unlined curtains?

Making Unlined Curtains

1. Cut the fabric to the required size, allowing 10cm (4″) for side hems and adding 20cm (8″) to the length for top and bottom hem allowances.
2. Turn in a double 2.5cm (1″) hem at each side and pin.
3. Turn up a double 7.5cm (3″) hem at the lower edge and pin.
4. Mitre both bottom corners.

How to make curtains without sewing?

1: Taking Measurements. The first step on how to make curtains without sewing is measurement.

Step#2. Cut your fabric. The next step on how to make curtains without sewing is cutting.

Step#3. Tape The Edges. Although this is optional,at this level,you can proceed to fold a hem down on your fabric.

Step#4. Tape the hem. You can make the hem. Measure your hem using a T-square or the creating and connecting the dots method you used for cutting.

Step#5: Create the rod Pocket. Since you will create your rod pocket on the top,that is the part of the fabric which you will fold over to allow

Step#6: Hang your curtains. The last step on how to make curtains without sewing is hanging your ready curtains. After having your panel,you should hang it!

How to make easy curtains?

Measure the window,adding width for folds in the fabric. Start measuring at the top of the window or slightly above it using a tape measure.

Choose a fabric that gives you the right amount of coverage. Curtains can be made from almost any fabric,so pick one that suits your needs.

Cut each panel with an additional 1–2 in (2.5–5.1 cm) on each side.

Fold and pin 1 in (2.5 cm) side seams on the back of each panel.

Iron the seams to crease the fabric. Set your iron to the lowest level and press along each of the seams.

Remove the pins to press fabric fusion tape between the seam and panel.

Place a damp towel on top of the seam and iron the fabric in place.

Clip curtain rings 1–2 in (2.5–5.1 cm) apart along the top seam.

Slide the rings onto a curtain rod to hang the curtains.

How do you make a window curtain?

Making Simple Curtain Panels Decide how long and how wide you want your curtains to be. Add extra inches for hemming. Wash, dry, iron, and cut your fabric. Fold the side hems down twice to make the hems. Topstitch the hems down. Fold the top and bottom hems down twice. Topstitch the hems down. Snip off any loose threads, then hang up your curtains.

How do you sew a quilt?

Begin your quilt by sewing each individual row of pieces together. Work by starting at one end of your row with two of your squares of fabric. Place the two squares with the pattern facing each other. Then, use a straight stitch on your sewing machine to sew a ¼-inch seam.