How deep is a toilet stall?

How deep is a toilet stall?

60”
A standard toilet stall will be 36” wide by 60” deep with a 24” wide door. In compliance with the Americans with Disabilities Act (ADA), bathrooms usually require one larger stall designed to accommodate wheelchairs.

What are the ADA stall requirements?

Accessible stalls shall be a minimum of nine feet (9′) in width and eighteen feet (18′) in length. Single stalls shall have an access aisle of eighteen feet (18′) long by five feet (5′) wide (minimum). Stalls shall conform to the Standard Plans.

What size is a handicap toilet stall?

60” x 60”
Multiple Toilet Stall Layouts In a corner handicap stalls require a minimum of 60” x 60” compartment and is required with a minimum door size of 32” and the maximum size and more common is the 36” door. Ambulatory compartment stalls are 35” – 37” width and have a 32” door which is handicap prepped.

How thick are bathroom stall walls?

Bathroom stall walls vary in thickness from 1/2 to 1 inch, depending on what material they’re made of. The density of the restroom wall matters to your customers, as a solid and sturdy partition will make them feel safe and help form a quality impression of your business.

How many ADA toilet stalls are required?

An Ambulatory Toilet Compartment is required in restrooms with six or more stalls and urinals combined. These compartments are required to be 60 inches deep and 35-37 inches wide. Toilets shall be located on the back wall of the stall with the toilet’s centerline located 17-19 inches from the sidewall or partition.

How many ADA toilet stalls do I need?

For 1–25 occupants, you need one male and one female restroom. The ADA requires at least one ADA-compliant restroom for each gender. Therefore, if your floor space is no more than 2,500 square feet, both restrooms will need to be compliant with the ADA.

What is a toilet stall?

A bathroom stall is an enclosed private space with a toilet or urinal available for use by the general public. Stalls vary in additional accommodations beyond toilet paper that range from a coat hook, trash bin, and toilet seat covers dispensers.

What is the minimum toe clearance requirement beneath a toilet stall partition door according to the drawings?

In standard stalls, the front partition and at least one side partition shall provide a toe clearance of at least 9 in (230 mm) above the floor. If the depth of the stall is greater than 60 in (1525 mm), then the toe clearance is not required.

How much room do you need around a toilet?

The size for a separate toilet compartment should be at least 36×66 inches with a swing-out or pocket door. Code Requirement: The minimum size for a separate toilet compartment is 30×60 inches.

What is the minimum size of a non ADA water closet stall?

The typical dimension of a non-ADA stalls is 3 ft wide by 5 ft. deep. For the ADA stall, the typical dimension is 5 ft wide by 5 ft deep which makes it more convenient for the handicapped access. This is usually dictated by the local municipal codes office and is always advisable to confirm with them to be sure.

What is the minimum width of an accessible stall that does not have a toe clearance?

What is code for toilet clearance?

Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.

What is the minimum width of a bathroom stall?

Standard Stall. The minimum width of the stall is 60 inches (1525 mm). The centerline of the water closet is 18 inches (455 mm) from the side wall. The location of the door is in front of the clear space and diagonal to the water closet, with a maximum stile width of 4 inches (100 mm).

What is the minimum amount of space needed for a toilet?

The minimum size for a toilet room is 15 square feet. This is the smallest amount of overall space needed to accommodate the required distances between the floor and ceiling, toilet and sink. A toilet room is also known as a half-bath or powder room.

What is the minimum size for a toilet closet?

For a forward and side approach or for a lateral transfer, there must be a clear floor space at the water closet that is a minimum of 60 inches (1525 mm) in width (parallel to the back wall) and a minimum of 56 inches (1420 mm) in length.

What is the standard depth of a toilet?

Standard toilet stalls with a minimum depth of 56 in (1420 mm) (see figure here-under) shall have wall-mounted water closets. If the depth of a standard toilet stall is increased at least 3 in (75 mm), then a floor-mounted water closet may be used.

https://www.youtube.com/watch?v=zK58m0Kamb8