How do you program a wireless winch remote?
How do you program a wireless winch remote?
Press and hold the ON/OFF button for three seconds (LED will turn on) to turn the remote ON. Press and hold the IN and OUT buttons for 20 seconds (LED will flash 1x per second) to clear the current programming. Release the IN and OUT buttons when the LED is on and no longer flashing (after 20 flashes).
Can I make my winch wireless?
With ControlAllWireless.com, you can add our wireless remote control system to your winch and control it from up to 500 feet away. …
How do you use a winch remote?
Winch the vehicle slowly using the remote control. Press the button on the remote control to start pulling your car out. You should feel your vehicle moving forward as it’s pulled out from whatever it’s stuck in. Release the button every few seconds and then resume winching; this will keep you from going too fast.
Are all winch remotes the same?
Winch Controllers. Depending on which type of winch you’re running, you can choose different compatible replacement controllers and 4 Wheel Parts is a great resource for these accessories. When you want to control your winch from a distance, a replacement controller is a must-have.
How do I activate my winch?
Rigging a winch
- Pull line to anchor point, and secure it with a strap, shackle, or a combo of the two.
- Lock the clutch, connect the remote, and put line under tension.
- Drape a blanket, coat, or other object on the line once it’s tight.
- Begin winching operation with short controlled pulls while operating your vehicle.
What is a winch control box?
Pioneered by Lewmar, ELS (Electric Load Sensing) electric winches are controlled by an Overload Protection Control Box, which allows the winch to be operated up to the safe working load of the specific winch. Once the load is reduced to below the safe working load, the winch can be restarted.
