How do I change my Belkin router settings?
How do I change my Belkin router settings?
General Belkin Router Configuration
- Visit the router’s IP address (http://192.168.2.1) in a new browser window.
- Click on DNS under Internet WAN.
- Enter the router’s password and click Submit.
- Uncheck Automatic from ISP and type in OpenDNS addresses in DNS Address and Secondary DNS Address.
- Click Apply Changes.
How do I get into my Belkin router settings?
Accessing the router’s web-based setup page
- Launch a web browser.
- Enter “https://router” or the router’s default IP address, 192.168.
- You will be asked to log in using the router’s admin password. If you have not set a custom password, just leave the Password field blank then click Submit.
How do I know if my Belkin router is working?
Check physical connections, cables and lights on the router. Ensure that the light corresponding to the port on the router where you had connected your computer is lit up and the cables are properly plugged in. Also, you can check if the computer is getting a valid IP address from the router.
How do I use my Belkin router as a repeater?
Check the “Enable Wireless Bridging” and “Enable ONLY specific Access Points to connect” box. If you don’t check this box, any router in range can act as a repeater, posing a significant security risk.
How do I setup my Belkin router without a modem?
How do I setup my Belkin router without a modem? Associate the modem to your Belkin router using an Ethernet cable. The Ethernet link must be connected to an open Ethernet port on your modem, and into the port on your Belkin router labeled “WAN/Internet. ” Reconnect your Internet modem to its capacity supply.
What is the IP address of my Belkin router?
192.168.2.1
NOTE: The default IP address of a Belkin router is 192.168. 2.1. You need to check the IP address range and Default Gateway to assign it to a computer when assigning a static IP address.
Why did my Belkin router stopped working?
Belkin Router issues often occur due to multiple reasons. Only an appropriate configuration of network settings could ensure a successful connection to the Belkin Router. Another reason behind the occurrence of issues like Belkin Router not working is the lack of communication between the router and the modem.
Why is Belkin router blinking orange?
Blinking Orange Light When the orange light on your Belkin router is blinking it means that your router is unable to detect the mode. The possible reasons for that are: The modem is turned off. The modem isn’t connected to the router with a cable.
What are the features of the Belkin enhanced wireless router?
In minutes you will be able to share your Internet connection and network your computers� The following is a list of features that make your new Belkin Enhanced Wireless Router an ideal solution for your home or small office network� naT IP address sharing
How do I congratulate my new Belkin router?
Page 25 Page 25 of 114 [insert EZI_16.tif] Congratulations You have finished installing your new Belkin Router. You will see the Congratulations screen when your Router can connect to the Internet. You can begin surfing by opening your browser and going to any website.
How do I get the best wireless network coverage on Belkin?
Page 4 To achieve the best wireless network coverage for your “wireless clients” (i.e., computers enabled by Belkin Wireless Notebook Network Cards, Wireless Desktop Network Cards, and Wireless USB Adapters): • Ensure that your Router’s networking antenna is positioned vertically (toward the ceiling).
