What is the difference between a Sanden 508 and 709?
What is the difference between a Sanden 508 and 709?
The 508 series Compressors are made at the Sanden facility in the Republic of Singapore and the 709 series Compressors are made in the USA. We recommend the 508 for most applications as they are a more rugged Compressor than the 709. The 709 is perfect for smaller engines and uses less Horsepower than the 508.
How do I identify a Sanden compressor?
A: Look at the label on the compressor. The Sanden part number is listed under “Model Number” on the label. The part number is a 4 digit number.
What kind of oil goes in a Sanden compressor?
PAG oils
All Sanden compressors are filled with genuine double end-capped PAG oils (SP-10, SP-15, SP-20, SP-A2). Regarding R134a, for best practice we recommend using the oil that the compressor was supplied with, however, the mixing of genuine SP-10, SP-15, SP-20 and SP-A2 oils should not cause any damage to the AC system.
How much oil does a Sanden AC compressor take?
3. For a new compressor to be used in this type of system, subtract the standard oil charge from the total oil charge to determine how much oil should be added to the compressor….TXV Systems. More than 56 oz. (1600g) Refrigerant Charge:
| Comp. RPM | Oil in Compressor | |
|---|---|---|
| fl.oz | cc | |
| 1,000 | 3.4 | 100 |
| 2,000 | 2.5 | 75 |
| 3,000 | 1.7 | 50 |
What kind of compressor does vintage air use?
SD 709 compressor
The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown.
What Freon does vintage air use?
Vintage Air Systems Are Designed to Operate With R134a Refrigerant Only! Use of Any Other Refrigerants Is a Fire Hazard and Could Damage Either Your Air Conditioning System or Your Vehicle.
What is a Sanden 508 compressor?
Genuine Sanden 508 Series compressors are available in 134A refrigerant. This compressor pumps 8.4 cubic inches per revolution with a maximum 6000 sustained RPM range. The Sanden 508 AC compressor provides ample capacity for even large interiors and will enhance the appearance of your engine compartment.
Do Sanden compressors come pre oiled?
Sanden compressors come with refrigerant oil already installed. The amount of factory installed oil varies by model. Check the compressor label for the exact amount of refrigerant oil specified for your unit. Do not substitute other oil types in Sanden compressors.
Is Sanden a good compressor?
Above 1200 RPM, efficiency rapidly increases; at operating speeds of 1800 to 2400 RPM it is about the most efficient pump on the market. It can be operated at continuous crank speeds of 6000 RPM. These characteristics make the Sanden an almost ideal performance compressor.
Do Vintage Air compressors come with oil?
No additional oil is necessary in new Vintage Air-supplied compressors. Typical problems encountered when charging a system: Noisy compressor: If a system is overcharged, both gauges will register abnormally high readings.
How much oil does a Vintage Air system take?
Vintage Air air conditioner compressor oil is 8.45 fl. oz.
