Popular guidelines

What is my Rogers modem password?

author 0

What is my Rogers modem password?

Enter the following default settings to access the modem settings and select Login:

  1. Username: cusadmin.
  2. Password: password (or your current Wi-Fi password)
  3. If you can’t log in, see the links within the note at the bottom of this page.

How do I log into my Rogers hitron modem?

Signing into the admin tool

  1. Open a web browser and visit 192.168.0.1.
  2. Sign in using the following credentials: Username: Cusadmin. Password: password (or your easy connect Wi-Fi password)

How do I reset my DPC3825 password?

How to Reset your Cisco DPC3825 Modem

  1. Locate the Reset button the back of the modem.
  2. Press and hold the Reset button for 10 seconds.
  3. After 10 seconds, release the button. The modem should restart and the lights will flash.
  4. Once the modem is finished restarting and is online the settings will be back to default.

How do I find the password for my modem?

First: Check Your Router’s Default Password

  1. Check your router’s default password, usually printed on a sticker on the router.
  2. In Windows, head to Network and Sharing Center, click on your Wi-Fi network, and head to Wireless Properties > Security to see your Network Security Key.

What is my Hitron password?

The default username for your Hitron router is cusadmin. The default password is password.

Where is the password on a Hitron modem?

Username: cusadmin. Password: The information is located on the white sticker on the top or side of the modem.

What is default password for Cisco router?

admin
Most routers and switches by Cisco have default passwords of admin or cisco, and default IP addresses of 192.168. 1.1 or 192.168. 1.254.

How do I change my converge password 2020?

How to Change Converge Password (5 Easy Steps) for Wifi and…

  1. Step 1: Access 192.168.0.1.
  2. Step 2: Log in to Converge Admin Portal.
  3. Step 3: Change your Username and Password on the Gateway Access.
  4. Step 4: Change your Wireless Network Name and Password.
  5. Step 5: Save your Settings.

How do I find my default router password?

To locate the default username and password for the router, look in its manual. If you’ve lost the manual, you can often find it by searching for your router’s model number and “manual” on Google. Or just search for your router’s model and “default password.”

How can I find out my password for my WIFI?

All you need to do is follow these steps:

  1. Open the Start Menu and type Command Prompt.
  2. Run the following command: netsh wlan show profile.
  3. You will see the list of all saved WiFi networks.
  4. Once done, you will see the WiFi password of that particular network or modem under the Security Settings.

Does the dpc3825 use Cisco stock firmware?

01-10-2013 09:53 AM The DPC3825 from rogers, is not using one of the STOCK firmwares from cisco, but a rogers modified one. This is likely the issue with why you do not get the defualt BLANK BLANK un/pw combo.. that its reseting to the rogers firmware defaults.

How do I know if my dpc3825 is online?

Click to enlarge. After the cable modem successfully registers on the network, the POWER, DS, US, and ONLINE indicators illuminate continuously to indicate that the cable modem is online and fully operational. Click to enlarge. The Cisco DPC3825 has the following ports available on the back.

Why can’t I get Blank Blank UN/PW on the dpc3825?

The DPC3825 from rogers, is not using one of the STOCK firmwares from cisco, but a rogers modified one. This is likely the issue with why you do not get the defualt BLANK BLANK un/pw combo.. that its reseting to the rogers firmware defaults. CUSADMIN is the rogers default login for it…

author

Back to Top