Trending

How do you use a ProCurve Switch?

author 0

How do you use a ProCurve Switch?

To connect a console to the switch, use the console cable shipped with the switch and connect a PC or VT-100 terminal to the console serial port….

  1. Reconfigure the switch and save the new settings.
  2. Reconfigure the terminal and save the new settings.
  3. Reboot the switch and re-establish the console session.

How do I manage my HP ProCurve switches?

How to: Configure a HP ProCurve switch

  1. Step 1: Connect your serial connection.
  2. Step 2: Conenct PuTTY.
  3. Step 3: Get the IP address.
  4. Step 4: Set time server.
  5. Step 5: Set SNMP community info.
  6. Step 6: Launch the web GUI.
  7. Step 7: Configure basic info.
  8. Step 8: Create VLANs.

How do I access HP switch from command line?

Configuration commands and the context configuration modes

  1. HP Switch(config)# interface c3-c6. HP Switch(eth-C5-C8)# HP Switch(config)# interface trk1. HP Switch(eth-Trk1)#
  2. HP Switch(eth-C5-C8)# HP Switch(eth-Trk1)# HP Switch(eth-C5-C8)#?
  3. HP Switch(config)# vlan 100.
  4. HP Switch(vlan-100)#
  5. HP Switch(vlan-100)#?

How do I configure my HP switch?

To do so, do one of the following:

  1. Enter setup at the CLI Manager level prompt. HP Switch# setup.
  2. Select Run Setup in the Main Menu of the menu interface.

What is HP ProCurve switch?

The HP Procurve managed 24-port switch has 10/100BASE-TX autosensing per port and 2 open transceiver slots for media flexibility. The HP Procurve switch 2524 is ideal for low-cost, managed 10/100 connectivity with uplinks. features.

How do I log into my ProCurve switch?

Log into your ProCurve using SSH or Telnet. Select Run Setup in the menu either by hitting 8 or using the arrow keys then hitting enter. Using the arrow keys, select Logon Default. Hit space to change Logon Default to CLI.

How do I setup my HP ProCurve Switch?

Installing the switch

  1. Verify components shipped with the ProCurve 2520 Switch.
  2. Prepare the installation site.
  3. Verify that the switch passes self-test.
  4. Mount the switch and route the power cords.
  5. Connect power to the switch.
  6. Connect the network cables.
  7. (Optional) Install mini-GBICs.

What is HP ProCurve Switch?

How do I assign an IP address to my HP ProCurve switch?

HP Procurve Switch # [Tab] to the IP Config (DHCP/Bootp) field and use the Space bar to select the Manual option. [Tab] to the IP Address field and enter the IP address that is compatible with your network. [Tab] to the Subnet Mask field and enter the subnet mask used for your network.

How do I know what HP switch I have?

User can use a couple of different methods to determine the current software revision of a ProCurve Switch:

  1. Launch the Web UI of the Switch, and look for the Version: located within the contents of the Identity tab.
  2. Via a Telnet or serial console session, issue one of these two commands from within the CLI.

How do I find the IP address of my switch?

Complete these steps

  1. Select the Start button located in the bottom left corner.
  2. Type Run into the Start Menu search and press Enter.
  3. Type CMD and press Enter.
  4. Type ipconfig/all and press Enter.
  5. Your network’s IP information should now be displayed in a list.

Does HP still make ProCurve switches?

HP ProCurve was the name of the networking division of Hewlett-Packard from 1998 to 2010 and associated with the products that it sold. The name of the division was changed to HP Networking in September 2010.

Where can I find the HP ProCurve command line interface reference?

• HP ProCurve Command Line Interface Reference – provides a dictionary of CLI commands and syntax. An electronic copy of this reference is included in PDF format on the CD shipped with your HP product, and is also available on the HP ProCurve website.

What is included in the HP ProCurve advanced configuration and management guide?

• HP ProCurve Advanced Configuration and Management Guide – contains advanced configuration information for routing protocols and Quality of Service (QoS). In addition, appendixes in this guide contain reference information for network monitoring, policies and filters, and software and hardware specifications.

Where can I find a copy of the HP ProCurve Security Guide?

An electronic copy of this reference is included in PDF format on the CD shipped with your HP product, and is also available on the HP ProCurve website. • HP ProCurve Security Guide – provides procedures for securing management access to HP devices and for protecting against Denial of Service (DoS) attacks.

What are the advanced ProCurve CLI commands?

These include vlans, trunking, IP routing, spanning-tree, and more. This page will provide a subset of advanced Procurve CLI commands for easy reference.

author

Back to Top