What is a T5 world class transmission?
What is a T5 world class transmission?
Enter The World Class T5 Enter 1985’s ‘World Class’ T5, a transmission that improved shift smoothness by installing individual needle bearings for each gear (versus the previous solid output shaft), fiber lined steel ring synchros, and tapered bearings.
What is the difference between T5 and T5 world class?
There are two generations of T-5 transmissions; from beginning of production until mid-1985 these units were referred to as “non-world class” units. The most important difference between the non-world class and the world-class transmissions is the torque rating. Later is better (or the higher the tag number).
How do I know if I have a World Class T5 transmission?
How to Identify a World Class T5 Transmission
- Find the ID tag attached to one of the transmission’s tail-housing bolts.
- Match the model application number to a T5 model number listing similar to one found on the Mongosgarage website.
How strong is t5z transmission?
The aftermarket TREMEC T-5 5-Speed with a 2.95:1 first and . 63:1 overdrive. This transmission safely handles 330 ft/lbs of torque and is suitable for 450 hp streetcars on DOT-approved tires.
How much torque can a world class T5 handle?
Later, the T5 was further upgraded to harness the power of the ’93 Mustang Cobra. This version, dubbed the T5 “Z” because of its Ford part number designation, has tapered output bearings and a steel front-bearing retainer (versus aluminum) among other things, pushing its torque rating to 330 lb-ft.
How strong can you build a T5 transmission?
G-Force Transmissions, the maker of some pretty stout competition gear boxes, also manufacturers high strength gears, shafts and other internals for the T5 transmissions. When properly assembled the G-Force T5 can handle 500 lb-ft of torque.
How do I know if I have a Borg Warner T5?
The Borg Warner T-5 is generally identified by a 1352-xxx number stamped on a metal tag on a tail housing bolt. This tag is normally under the second bolt from the top on the left side of the transmission. While Ford used aluminum for these tags, GM used steel which is prone to rusting.
How much torque can a T5 transmission handle?
My T5 has lasted very reliably behind about 480 ftlb flywheel torque (412 at wheels) with much full throttle use at the strip. Having said that though some people seem to be very ‘hard’ on transmissions and can spit a T5 all over the ground behind a stock 302. If you think you’re in that catagory then don’t use the T5.
How much power can a T5 transmission take?
My T5 has lasted very reliably behind about 480 ftlb flywheel torque (412 at wheels) with much full throttle use at the strip. Having said that though some people seem to be very ‘hard’ on transmissions and can spit a T5 all over the ground behind a stock 302.
Is the T5 a good transmission?
Not only does the T5 provide a highway-friendly overdrive, but it also provides a deep First gear ratio for better off-the-line performance. The Mustang’s T5 five-speed transmission has been in continuous production for 34 years.
How strong is a world class T5?
The stock T-5Z can handle up to 450 hp with a soft locking clutch when it is not shock loaded like in drag racing.” Couture tell us the aftermarket offers performance enthusiasts heavy-duty gear sets for the T5, with some companies claiming 600 lb-ft of torque capacity.
What kind of transmission is a T5 world class?
The T5 World Class is a five speed, RWD or 4WD transmission. The T5 World Class is a American engineering design, this transmission is all aluminum top loaded with internal single rail shift linkage.
How much does a T5 2nd gear transmission cost?
From $103.77 T5 2nd Gear with 30 or 31 teeth will fit Ford World class T5 transmissions 1985-up with a 052, 065 or 068 cluster. From $76.05
How much is a cluster gear for a Ford T5 transmission?
Cluster gear for T5 3.35 ratio world class Fords with tooth count of 34-31-23-15 (R)-15. Cluster gear for T5 3.35 ratio world class Fords with tooth count of 34-29-23-15 (R)-15. From $99.00 Cluster gear for T5 2.95 ratio world class Ford & GM V8 with tooth count of 31-29-22-15 (R)-14. From $173.00 Cluster gear for T5 non world class transmissions.
What kind of warranty do you have on the T5 world class?
We provide a no hassle 12 month warranty, performance guaranteed. The T5 World Class is a five speed, RWD or 4WD transmission. The T5 World Class is a American engineering design, this transmission is all aluminum top loaded with internal single rail shift linkage.
