What is the difference between Avid BB5 and BB7?
What is the difference between Avid BB5 and BB7?
Basically the BB7 and BB7 are the same unit, but with some upgrades in the latter. The main difference is that in the BB5 only the fixed pad can be moved so the setting up is more complex as is adjustment…… With the BB7 both the moving and stationary pad can be adjusted so this makes setup quicker and easier.
Are Avid Elixir brakes good?
Our review The Elixir 1 is the bottom rung of the Avid hydraulic brake ladder, but it still delivers high levels of traction control in a dependable and affordable package. The 1 is definitely a built-to-price brake, with a slightly bulky master cylinder shape and a split rather than two-piece bar clamp.
When should I replace my Avid brakes?
Avid brake pads should be replaced when the total thickness of the backing plate and pad friction material is less than 3mm. Replacing worn brake pads will improve braking performance. new brake pads are subject to a “bed-in” period. It may take anywhere from 20 to 40 complete stops to break in Avid pads.
Are BB7 brakes good?
The BB7 is a great brake. I use these on my cyclocross bike with 160 mm rotors. I “upgraded” to the bb7 from the BB5. The pads on both sides of the caliper can be adjusted on the BB7 and this makes maintenance and adjustment of the pads much easier and faster.
How do you adjust Avid Elixir brakes?
Loosen each pad adjustment knob an equal amount. Grab lever at end of pad and push toward center of caliper body, pulling pad outward and away from caliper. Repeat process for second pad. Push lever to center of caliper body and lift to remove.
How do you remove Avid Elixir brakes?
Use a 2.5 mm hex to remove the guide pin from the caliper. Elixir 1 – Use needle-nose pliers to straighten, then remove, the pad retention pin. 3 Pull and remove both brake pads and h-spring. If the total thickness of the backing plate and pad friction material is less than 3 mm, the brake pads need to be replaced.
What fluid does Avid Elixir use?
5.1 DOT Fluid
For best results, use only Avid High-Performance 5.1 DOT Fluid. If Avid fluid is not available, only use DOT 5.1 or 4 fluid. Do not use mineral oil or DOT 5 fluid. Used DOT fluid should be recycled or disposed of in accordance to local and federal regulations.
How do I adjust my Avid Elixir 5?
