What is a 12 point socket good for?
What is a 12 point socket good for?
The additional points make these sockets easier to connect with the heads of fasteners. This is ideal if you are trying to work on a fastener that is hard to see or you cannot see at all. 12 point sockets are also great for use in tight spaces as they allow you to connect to a fastener at more angles.
Are 12 point sockets needed?
Is this really necessary? Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners.
How big is a 30 mm socket?
Wrench Size And Conversion Table
| Inches | Millimeters | Spanner |
|---|---|---|
| 1.181 | 30mm | 30mm |
| 1.200 | 11/16 Wworth; 3/4 BSF | |
| 1.250 | 1 1/4 AF | |
| 1.260 | 32mm | 32mm |
Do they make a 31mm socket?
Sunex 231md 1/2-Inch Drive 31-mm Deep Impact Socket.
Can a 12 point socket be used on hex head bolt?
Both 6-point and 12-point sockets can be fitted on hex nuts, the primary differences being convenience and torque. The more points a socket has, the more points of contact available. Compared with the 6-point socket, a 12-point socket has twice as many points, so it can more easily slide onto a hex nut.
What socket is better 6 or 12 point?
Therefore, 6 point sockets are the clear winner, and here’s why: Six-point sockets have thicker walls than 12 point sockets. Thus, 12 point sockets often come out of the fastener due to its thinner material. On the other hand, there’s no such problem with the 6 point sockets.
Which is better a 12 point socket or a 6 point socket?
If your fastener is 12-point, which is somewhat uncommon, then you must use a 12-point tool. For 6-point fasteners, a 6-point tool is your best choice. Matching up the points between the tool and fastener means that you will maximize the surface area of steel in contact, making the tool less likely to slip or fail.
What is a 30 mm in standard?
SAE to metric wrench or spanner converting chart.
| Standard SAE US Wrench/Spanner Size (inches) | Metric Wrench/Spanner Size (mm) |
|---|---|
| 1 1/8 | 28.58 |
| 29 | |
| 30 | |
| 1 3/16 | 30.16 |
What is a 31 mm socket in standard?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 3/4″ | 29mm | 1-1/8″ |
| 32mm | 1-1/4″ | |
| 7/8″ | 34mm | 1-5/16″ |
| 35mm | 1-3/8″ |
What’s the difference between 12 point and 6 point socket?
A six-point socket is of hexagonal shape. It has six vertices or points, and they have an even space between them, which is 60° angle. On the other hand, a 12 point socket is double hexagon-shaped, including 12 vertices or points.
