What are the most common GM TPMS relearn procedures?
What are the most common GM TPMS relearn procedures?
The three types of relearn procedures are auto relearn, stationary (manual) and OBD. Some vehicles may use a combination of two or more relearn types. Indirect TPMS systems use an initialization procedure which may require a TPMS tool to figure out the steps involved to reset the system.
How do you reset the tire pressure light on a 2013 Chevy Equinox?
2008-2021 Chevrolet Equinox Tire Pressure Sensor TPMS Light Reset Guide
- Turn the ignition key to the “ON” position without starting the engine.
- Press the Remote Keyless Entry (RKE) transmitter’s LOCK and UNLOCK buttons simultaneously for five seconds.
- Activate the TPMS sensor.
How do you reset the PSI on a Chevy Equinox?
Turn your vehicle’s key to the “On” position without starting the vehicle. Push the TPMS reset button until the tire pressure light flashes three times, then let go. Start the car and wait for about 20 minutes for the tire pressure sensor to refresh.
How do I relearn a GM TPMS without a tool?
Method 2 – Reset the TPMS With No Tool Step 1 – Turn the engine off and have the vehicle in the ON accessory position. Step 2 – Go to your display, which should be under the speedometer and toggle through your vehicle information until you see the tire pressure information.
How do you relearn a GM TPMS?
Manual relearn procedure, Base Level DIC, 2015-2020:
- Confirm TPMS sensors are properly installed.
- Adjust tire pressures to placard value.
- Apply parking brake.
- Turn vehicle to ON/RUN.
- Push the trip odometer reset stem until Tire Pressure is displayed.
- Push and hold trip reset stem to begin the sensor matching process.
How do I learn new TPMS sensors on GM?
Press and hold the keyless entry fob transmitter’s LOCK and UNLOCK buttons, at the same time, for about five seconds to start the TPMS learn mode. The horn sounds twice indicating the TPMS receiver is ready and in learn mode.
What is TPMS relearn tool?
The purpose of the relearn is to share the new TPMS sensor IDs to the vehicle. This allows the sensors to “talk” to the vehicle and alert the driver if any tires have low air pressure or if there is a malfunction with the TPMS system.
What is a relearn tool?
How do you reset the tire pressure sensor on a 2013 GMC Terrain?
Mid Level Display
- Select INFO.
- Scroll down to the TIRE PRESSURE menu.
- Press and hold the ✓ button until the horn sounds twice to enter the relearn mode.
- Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem.
- A horn chirp will confirm that the sensor has been reset.
How do you reset the tire pressure monitoring system on a 2014 Equinox?
To reset the tire pressure monitor or tpms system in your 2014 Chevy equinox vehicle, turn the ignition key to the “on” position and depress the tpms button, usually located under the dash, until the tpms light blinks several times.
