What is a tongue and groove plane?
What is a tongue and groove plane?
Match planes, or tongue and groove planes, are made in pairs with one plane cutting the groove and the other the tongue for making the tongue and groove joint. Both planes are fenced and the work pieces, when referenced from the same stock face, will line up flush when when put together.
What is a Plough plane used for?
A grooving plane, plow plane, or plough plane is a plane used in woodworking to make grooves and (with some of the metal versions) small rabbets. They are traditionally used for drawer bottoms or rear walls.
How does a rabbet plane work?
A rabbet plane features an iron with a cutting edge that extends to the sides of the plane body. This effectively lowers the cutting angle of the iron to make it especially useful for slicing cleanly through end grain. A skew rabbet plane is designed to slice through end grain, such as the shoulders of a tenon.
What is a combination plane for?
The combination plane combines the functions of, rebate and grooving and moulding planes. It can be used for various tasks including grooving, rebating and cutting dados (housings) and tongue and groove joints.
What is a fillister plane?
A fillister plane is used for forming and trimming rebates / rabbets with the capability of working with the grain or against the grain. A fillister plane is equipped with a spur or nicker for the cross grain work.
What is a dado plane?
Definition of dado plane : a narrow rabbet plane that has two spurs and often an adjustable fence and that is used for making flat-bottomed grooves in woodwork.
What is a shoulder plane used for?
The shoulder plane is used to trim the shoulders and faces of tenons. It is used when it is necessary to trim right into the concave corner where two surfaces of the same piece of wood meet perpendicularly. It is also commonly used to clean up dadoes (housings) and tenons for joinery.
What is a grooving plane used for in construction?
A grooving plane, plow plane, or plough plane is a plane used in woodworking to make grooves and (with some of the metal versions) small rabbets. They are traditionally used for drawer bottoms or rear walls. Moody, John A. (1981).
Based on the Stanley No. 48 and 49, our Tongue and Groove Planes are more heavily built for sound performance with a very thick blade. Also, rather than having two separate blades, ours is a single forked blade that registers on the milled body casting to ensure squareness and equal depth of cut on both sides.
Do you need a pair of Matt Kenney’s grooving planes?
All you need is to make a pair of Matt Kenney’s grooving planes. Equipped with a built-in fence, these planes plow a perfect groove in about a minute, with no setup needed. You need a pair so you can always cut with the grain. Simple, efficient, and quiet. And easy to make. Just the way this hand-tool lover likes it.
Do you need power tools to make grooves?
Synopsis: You don’t need power tools when you need to create a lot of grooves of the same width and distance from the edge, such as when making boxes or drawers. All you need is to make a pair of Matt Kenney’s grooving planes. Equipped with a built-in fence, these planes plow a perfect groove in about a minute, with no setup needed.
