Other

What is a PF kit in a Brother printer?

author 0

What is a PF kit in a Brother printer?

The PF Kit 1 (Paper Feeding Kit 1) is a periodic maintenance item and should be replaced as soon as possible to maintain optimum reliability. NOTE: The machine will continue to work with the message on the display. However, paper jams or other feed-related problems may occur more frequently if the kit is not replaced.

How do I clear the message replace PF Kit 1?

7) The PF Kit life counter needs to be reset to clear the “Replace PF Kit” message. To do this, press the GO and + buttons at the same time until “Reset Parts Life” is displayed. Now press the + button until PF Kit 1 or 2 is displayed and press SET. The counter will now be reset.

What is a PF kit for Brother MFC 9340cdw?

The PF Kit1 unit is a periodic maintenance part and should be replaced to maintain optimum print quality and reliability and to prevent paper jams. You can view the machine’s page counters for printed pages. Swipe up or down, or press the UP OR DOWN ARROW to display Machine Info. 5.

How do I reset my Brother printer parts?

Reset the Drum Counter

  1. Close the front cover.
  2. Make sure the machine is turned on.
  3. Press. (Settings).
  4. Press All Settings. (This step might be skipped in some models.)
  5. Choose Machine Info. or Machine Information => Parts Life.
  6. Press and hold Drum or Drum Life until the machine’s display message changes.
  7. Press Yes.
  8. Press.

What is a PF kit1?

The PF Kit 1 (Paper Feeding Kit 1) is a periodic maintenance item and should be replaced as soon as possible to maintain optimum reliability. NOTE: The machine will continue to work with the message on the display.

How do you reset the drum on a Brother printer?

To reset the drum counter:

  1. Press the UP OR DOWN ARROW key to select Machine Info.
  2. Press the UP OR DOWN ARROW key to select Reset Parts Life.
  3. Press the UP OR DOWN ARROW key to select Drum Unit.
  4. Press the UP ARROW key to reset the drum unit counter.
  5. The display will show ‘Accepted’ and the machine will return to ‘Ready’.

How do you reset the drum on a Brother 5850?

How to Reset Drum on Brother MFC-L5850dw

  1. Make sure the printer is on.
  2. On the LED Display, Press “Settings” (picture of wrench), Select “All Settings”, Scroll down to “Machine Info” Select “Parts Life”
  3. Press and hold [Drum] until the touchscreen message changes.
  4. Press [Yes]
  5. Press [Home]

How do I remove the roller from my Brother printer?

FAQs & Troubleshooting

  1. Open the Top Cover (1) then the Front Cover (2) by pulling the Cover Release Lever (3) toward you.
  2. Press the tab on each side of the Pick-up roller cover toward the center of the cover (1) and then pull the cover down.
  3. Slide the Pick-up Roller (1) all the way to the right.

author

Back to Top