How do you maintain acid stained concrete floors?
How do you maintain acid stained concrete floors?
HOW TO CLEAN STAINED CONCRETE FLOORS
- Dry dust mop or damp mop regularly to keep away dirt and grime, cutting down on abrasion.
- Damp mop with a pH-neutral cleaner and water for an occasional deeper cleaning.
- Protect with a good film-forming sealer and a coat of wax or floor finish.
How do you clean acid washed concrete?
For deep cleaning, a light solution of an organic concrete cleaner & degreaser or a mild, non-ammonia dish washing soap and water will do. Steam floor mops should not be used on concrete floors finished with floor wax.
How often do you have to seal acid stained concrete?
To keep exterior stained surfaces protected, apply a new coat of sealer every year or two, or as necessary. When you begin to notice that water no longer beads up on the surface, it’s time to reseal.
How much does it cost to acid wash a floor?
Acid Stain Concrete Cost Acid-based stains are also referred to as “reactive stains” and cost around $6 per square foot for a basic design.
How do you clean concrete floors NZ?
Ensure that you use PH neutral cleaning materials and use hot water, as acidic detergents will gradually dull the shine of your floors over time. Rinse your mop or cleaning cloths often and be sure to replace the water a few times during the cleaning process.
How do you prepare old concrete for acid stain?
Go over the area thoroughly with a wet mop and plenty of fresh, clean water. Allow the surface to dry completely before proceeding with acid staining. Floor prep is hard work, it’s messy, and it takes some time, but it’s worth the effort to be sure your decorative concrete installation lasts.
Can you remove acid stain from concrete?
A solution of 40 parts water to 1 part muriatic acid, a scrub brush and cotton rags will help remove the stain. You can let the surface dry and then work back into the floor with the stains to get the desired color. This method is by far the most successful when wanting to pull stain back out of concrete.
How much does it cost to acid wash concrete?
Concrete Staining Cost
| Item | Unit Cost | |
|---|---|---|
| 1. Rustic acid-wash stain: dark and marbled appearance. | $0.32 | per sq.ft. |
| 2. Upgrade: additional cost to apply decorative acrylic sealant: wet look, non-yellowing, solvent based. | $0.28 | per sq.ft. |
| Material Cost | $0.63 | per sq.ft. |
| 3. + Labor Cost (basic) | $36 | per hour |
Are acid stained concrete floors slippery?
Like any hard, smooth surface, stained concrete can become slippery when wet, especially if it has been coated with a high-gloss sealer. For concrete floors or walkways exposed to moisture or in areas with a lot of foot traffic, there are ways you can increase the slip resistance without affecting the color.
Do you need to seal acid stained concrete?
To prolong stain life, you should protect exterior stained concrete surfaces with a clear sealer and interior floors with a good floor wax. To keep your stained concrete looking its best, you will also need to clean it periodically by dry dust mopping and occasional wet mopping with a neutral-pH cleaner.
What is a natural pH cleaner?
Step 1. Mix 1 gallon of hot water with 1/4 cup of a pH-neutral liquid dish detergent in a bucket. Swish a mop in the solution to agitate the ingredients until suds form. Dish detergent is one of the most common pH-neutral cleaners, and works perfectly for floors.
