Can I use light duty staples in a heavy duty staple gun?
Can I use light duty staples in a heavy duty staple gun?
Light-duty hammer tackers can load 1/4-, 5/16- and 3/8-inch staples. The heavy duty model can also load 1/2-inch staples, and an extra heavy duty tacker, used for putting down roofing shingles, can drive a heavy gauge, 3/4-inch staple.
What is a light duty staple gun for?
This staple gun is durable enough for year-round projects, whether attaching holiday lights and cables, fixing upholstery, or securing carpet and insulation.
What size staples does a Stanley stapler take?
2.6 out of 5 stars….Product Specs.
| Capacity Range | Staples: 1/4 in (6 mm), 5/16 in (8 mm), 3/8 in (10 mm) |
|---|---|
| Overall Length (in) | 6 in |
| Overall Length (mm) | 152 mm |
Will light duty staples go into wood?
As it is light duty stapler it cannot be stapled into solid wood.
Can I use regular staples in a staple gun?
The right staples aren’t necessarily determined just by the manufacturer. More important than the brand of staples is the size. Check your stapler or staple gun to see what size staples you need. If you find those at your local Westlake and they’re made by a different manufacturer, they should still work fine.
What size staples does a Stanley tr110 use?
Uses TRA700 Series or Arrow® T50 Staples from 1/4 in. to 9/16 in.
What size staples does a Stanley tr35 use?
Product Specs
| Capacity Range | Staples: 1/4 in (6 mm), 5/16 in (8 mm), 3/8 in (10 mm) |
|---|---|
| Overall Length (in) | 5-5/8 in |
| Overall Length (mm) | 143 mm |
How do you use a Stanley heavy-duty staple gun?
Starts here0:42HOW TO LOAD REPLACE STAPLES STANLEY TR110 STAPLE GUNYouTube
How do you put staples in a Stanley heavy-duty stapler?
How to Load Staples Into the Stanley Sharpshooter Stapler
- Release the loading latch at the end the stapler and pull the slide open.
- Lay a stick of staples in the loading channel with the legs of the staples facing up.
- Push the slide in until the loading latch clicks and catches.
What staple gun should I buy?
BEST OVERALL: DEWALT DWHTTR350 Heavy-Duty Aluminum Stapler/Brad Nailer. BANG FOR THE BUCK: Arrow T50 Heavy-Duty Staple Gun. BEST ELECTRIC: DEWALT 5-in-1 Multi-Tacker and Brad Nailer. BEST FOR FINISH WORK: Bostitch 18-Gauge Crown Stapler.
How do I measure staples for a staple gun?
Most staples have two reference numbers that are normally standard throughout the brands. The first digits, i.e. 24/## or 26/## indicate the gauge of the wire, the thickness. The second number reflects the length of the staple leg, or shank, and is measured in millimetres.
