Contributing

How do I change the IP address on my Brother HL 2270dw?

author 0

How do I change the IP address on my Brother HL 2270dw?

To change the IP address information, double click the printer you wish to change and enter the print server password (refer to the print server userguide for information on passwords). Select the ‘TCP/IP’ tab and enter the new IP address information.

How do I change the IP address on my Brother printer?

Front Panel Method

  1. Press the ‘+’ button until ‘NETWORK’ is displayed on the printer LCD panel.
  2. Press the ‘Set’ button to display ‘TCP/IP’ On printers with two line displays,
  3. Press the ‘Set’ button.
  4. ‘TCP/IP ENABLE’ is displayed.
  5. Press the ‘+’ button.
  6. IP ADDRESS is displayed.
  7. Press the ‘Set’ button.

How do I connect my Brother HL 2270dw printer to WIFI without cable?

Configure the wireless settings:

  1. Place the Brother machine within range of your WPS or AOSS™ access point/router.
  2. Make sure that the power cord is plugged in.
  3. Turn on the machine and wait until the machine is in the Ready state.
  4. Hold down the WPS or AOSS™ button on your WLAN access point/router for a few seconds.

How do I reset my Brother HL L2370DW WIFI?

Reset the Network Settings to the Factory Settings

  1. Press or to select the [Network] option, and then press OK.
  2. Press or to select the [Network Reset] option, and then press OK.
  3. Press for [Yes]. The machine will restart.

How do I change the network on my Brother printer?

Changing the network settings using the control panel:

  1. Press ▲ or ▼ to select Network, press OK.
  2. Press ▲ or ▼ to select Wired LAN (for Ethernet connection) or WLAN (for wireless connection), press OK.
  3. Press ▲ or ▼ to select TCP/IP, press OK.
  4. To change the IP address, press ▲ or ▼ to select IP Address, press OK.

How do I print a network configuration page on a Brother HL-2270DW?

You can check the current network settings by printing out a Network configuration page. Hold down Go for 10 seconds. Release Go when the machine prints a Network Configuration page. If you release Go in less than 10 seconds, the machine will print if you have any reprint data.

How do I print a network configuration page on a Brother HL 2270dw?

How do I change the WiFi on my printer?

Click the Utilities tab. Click Printer Setup & Software, and then click Reconfigure Wireless Settings. Follow the instructions to change the wireless settings.

How do I print a network configuration page on my Brother printer?

How do I print a network configuration page?

  1. Press the ‘+’ key until you see “INFORMATION”
  2. Press the ‘SET’ key.
  3. Use the ‘+’ or ‘-‘ keys until you see “PRINT SETTINGS”
  4. Press the ‘SET’ key and the print configuration pages are printed.

author

Back to Top