Other

How do I clear the Clear CMOS?

author 0

How do I clear the Clear CMOS?

Steps to clear CMOS using the battery method

  1. Turn off all peripheral devices connected to the computer.
  2. Disconnect the power cord from the AC power source.
  3. Remove the computer cover.
  4. Find the battery on the board.
  5. Remove the battery:
  6. Wait 1–5 minutes, then reconnect the battery.
  7. Put the computer cover back on.

How do I clear the CMOS with the clear CMOS button?

– Resetting the BIOS to default values (Clear CMOS) “BIOS button”

  1. Power off the computer and unplug the power cord.
  2. Locate the “CMOS” button on the back of the board near the I/O ports.
  3. Press and hold the “CMOS” button for 5-10 seconds.
  4. Plug in the power and power on the computer as you would normally.

What does clearing the CMOS do?

Clearing the CMOS resets your BIOS settings back to their factory default state. In most cases, you can clear the CMOS from within the BIOS menu. In some cases, you may have to open your computer’s case.

Will clearing CMOS delete my files?

Computers! A bios reset (or cmos short/reset etc) will only wipe data of bios settings/clear bios settings as any saved setting state will be lost when the motherboard loses power or is shorted. This won’t affect data on your hard drives like personal files if that is what you’re wondering.

How do I clear the CMOS MSI h81m p33?

MSI CMOS Clear Instructions

  1. Ensure the system is switched off.
  2. Short the JBAT1 2-pin jumper block for 10 seconds either using a jumper, or a screwdriver.
  3. Remove the short.
  4. Turn the system back on.

How do I reset my MSI BIOS to factory settings?

After entering the BIOS menu, press “F9”. After the following screen appears, press “Enter” to restore the BIOS setting to the factory default.

Can I use a magnetic screwdriver to clear CMOS?

Yes it can. If the battery voltage isn’t enough to keep the date/time and other BIOS settings set, you’ll typically get a “Time and Date Not Set” or “CMOS checksum error” type message on power up.

author

Back to Top