How do I connect a wireless thermostat to my boiler?
How do I connect a wireless thermostat to my boiler?
To connect a smart thermostat to your boiler, the thermostat will require a power source (battery or wired), as well as a receiver box if one is required. Use the screen and the buttons on the thermostat to navigate the system. In some cases, both devices will automatically connect when they are turned on.
How do I reset my Salus thermostat?
The Backlight Liquid Crystal Display (LCD) gives a highly visible, easily readable indication of the programmable thermostat status. Press the buttons together for 3 sec. Press Up or Down to select the hour format. After power up, the thermostat is reset.
How do I install the it500 on the Salus controls server?
Constant green light when the iT500 is connected to the SALUS Controls Server. iT500 Installer Manual 07 iYou require port 80 and 2165 UDP open on the router 1 2 3 4 5 6 Insert the second battery supplied into the left hand side of the base of the iT500 Thermostat. Replace the battery cover to the base of the iT500 Thermostat.
Are these Instructions applicable to my Salus controls?
These instructions are applicable to the SALUS Controls model stated on the front cover of this manual only, and must not be used with any other make or model. This accessory must be fitted by a competent person, and installation must comply with the guidance provided in the current IEE Wiring Regulations and current Building Regulations.
When will the globe icon appear on the Salus itg500 gateway?
The globe icon will appear when the unit automatically connects to the internet via the SALUS iTG500 Gateway. This should take approximately 20 seconds. * Over The Air operated software iT500 Installer Manual 09
How do I control my it500bm from my PC or smartphone?
Control available on your Smartphone or PC is also available locally on the iT500. el . i 08iT500BM User Manual iT500BM USER Resized 002_Layout 1 12/11/2013 14:42 Page 8 System PC & Smartphone Control Switching your heating from AUTO to OFF. Press the power button to start and use the buttons indicated to switch from AUTO to OFF.
