How do I connect my night owl DVR to my IPhone?
How do I connect my night owl DVR to my IPhone?
- Log into the Night Owl Protect app by entering the PIN you created or by tapping Use FaceID.
- Tap Add New.
- Tap Recorder.
- If a notice displays requesting access to the camera, tap OK.
- Ensure the recorder is connected to your Internet using the included Ethernet cable.
- At this point you can add the recorder by.
How do I connect my night owl camera to my phone?
Go to the Google Play Store (Android) or App Store (iOS) to download and install the Night Owl Connect App on your Smart Device. NOTE: Before you continue with the initial setup of the Night Owl Connect App and product pairing, ensure that your Wi-Fi router is transmitting signals at 2.4Ghz band.
Why wont my night owl camera work on my phone?
Reboot your Smart Device. Remove and reinsert the battery. If the device doesn’t have a removable battery, press and hold the power button and volume down button for up to 15 seconds until the device resets. Turn the device back on and reopen the Night Owl HD App.
Where do I find my night owl device ID?
The device ID can be used to connect a device during setup, or to recognize a device on a network where multiple devices are present. On newer systems the Device ID may be printed on the QR code sticker. This sticker is generally located on the side or base of a camera, or on the bottom of a DVR / NVR recorder.
How do I add a device to Night Owl app?
Adding a Standalone Camera using the Camera’s QR Code
- Log into the Night Owl Protect app by entering the PIN you created or by tapping USE FINGERPRINT.
- Tap the.
- Tap Standalone Camera.
- If a notice displays requesting permission to take pictures and record video, tap Allow.
- Locate the QR code on the back of the camera.
How do I find my night owl password?
To do so:
- Open the Night Owl Protect App on your Smart Device.
- Tap “Forgot your password?” on the Sign In screen.
- Retrieve the temporary code sent to the email address registered to your Night Owl Protect Account.
- Enter the temporary code.
- Create a new password and verify it.
- Tap “Save Password.”
How to connect Night Owl to WiFi?
a. Go to the Google Play Store (Android) or App Store (iOS) to download and install the Night Owl Connect App on your Smart Device. NOTE: Before you continue with the initial setup of the Night Owl Connect App and product pairing, ensure that your Wi-Fi router is transmitting signals at 2.4Ghz band.
How to sign in to Night Owl app?
Open the Night Owl Connect App from your Smart Device and tap “ Sign In. ” b. Enter the email address and password used for setup and tap “ Sign In. ” NOTE: If you do not remember your password, tap “ Forgot Password ” and see section 1E Password Reset. iv. Adding a Device a.
Why is my Night Owl not recording?
If the device is not recording, it will not send out notifications. The microSD Card must be properly formatted. See your product Manual for information on formatting. 2. Please make sure you are using the correct App for your device. See the chart below . 3. Ensure the Night Owl Connect App and Smart Device software are both up to date.
