How do I connect my Uniden camera to my phone?
How do I connect my Uniden camera to my phone?
A: Go to Settings > Camera > Pairing. Press the number of the camera to pair, then press the pairing button on the camera within 30 seconds.
What app do I use for Uniden Guardian?
Gurardian app for Android based smartphones and iPhones and how to use them with your system.
Why won’t my Uniden camera connect?
Make sure the camera is properly powered on. Make sure the WiFi router has enabled SSID broadcasting. The camera does not find the router to connect to Make sure you selected the correct router in your device WiFi setting. Make sure you entered the correct password for the router you selected.
How do I connect my guardian camera?
Wired Setup – Connect the camera to your router using the microUSB to Ethernet cable provided. Connect to power. After about 45 seconds, the green LED begins to flash (3-flash/pause pattern), indicating that the camera is in Pairing mode. Go to the next section – Connect Camera and Mobile Device.
How do I connect my Uniden camera to my Iphone?
Hope it works for you too.
- Turn your phone into Hotspot mode.
- Connect the device that displays your cameras to the hotspot internet and launch the app and go to live connection to view your camera(s)
- Reconnect your viewing device back to your home internet.
How do I setup my Uniden?
Basic Setup Press the Menu button on your handset and select the Handset Setup menu. Next, select the Language submenu, move the cursor to your language choice, using the arrow key. Once selected, press the Select button to confirm. You will then be required to establish the date and time settings.
How do I find my Uniden baby monitor password?
If you forgotten the password, please press and hold the reset button at the back of the App Dock for 5 seconds. Tap on the Advanced Setting option to display the Advanced Setting screen below. Tap on the Change Password option to key in and confirm the new password.
How do I reset my Uniden camera?
On the Devices Page, tap and choose to delete camera from the list. To rest the camera, use the provided reset needle to hold the reset button for 5 seconds. A voice prompt “ factory resets succeeds ” indicates the camera has been reset successfully. The field of view of Uniden Solo is 130° diagonally.
How do I connect my Uniden baby monitor to WiFi?
To pair a device, tap the “Add Device” button or the “+” button on the top right-hand side of the screen if you already have shared access or a paired device. Once you have tapped the Add Device button, tap the Baby Monitor icon to set up the BW140R camera. 7. Tap “next step” to continue.
How do I get my Uniden scanner to work?
Programming a Handheld Model of the Uniden Bearcat Scanner
- Ensure the battery is fully charged, or plug in the AC adapter.
- Press the “Scan” button to put the handheld into scanning mode and press “Manual” to enter manual programming mode.
- Enter the frequency you wish to store, using the numeric keypad.
How do I program my Bearcat scanner?
Starts here1:48Programming Your BC75XLT – YouTubeYouTube
How do I reset my Uniden camera password?
You can reset the password through the QR code or the security questions. To reset through the QR code, make sure the Enable check box is selected in Main Menu > SYSTEM > SECURITY > Password Reset. To reset through the security questions, make sure the security quesitons is configured. Enter the login interface.
