Contributing

How do I force my Whirlpool Cabrio to drain?

author 0

How do I force my Whirlpool Cabrio to drain?

Find the “Pause/Cancel” button on the control panel. Press this button twice to drain the washer. Press the “Power” button and rotate the cycle selection knob to “Drain and Spin” to remove the remaining water from the load.

Why is my Cabrio washer not draining?

If your washer still doesn’t drain, remove the hose that runs from the pump to the drain. Make sure this hose is free from debris and blockages. If your pump is getting power, and no clogs are found it’s best to replace the drain pump motor. You can also use a multimeter to check for continuity inside the drain pump.

How do you manually drain a Whirlpool washing machine?

If not, follow these steps:

  1. Step 1: Turn off the power and lay down towels. For safety, unplug the machine.
  2. Step 2: Locate the drain hose at the back of the washing machine.
  3. Step 3: Drain the water.
  4. Step 1: Turn off the power and lay down towels.
  5. Step 2: Locate the drain hose.
  6. Step 3: Drain the water.
  7. Step 4: Scrub the filter.

How do I drain the water from my Whirlpool top load washer?

How to Drain a Top-Loading Washing Machine

  1. STEP 1: Turn off the power. Switch the power button on the machine off, if your model has one.
  2. STEP 2: Locate the drain hose and water supply hoses.
  3. STEP 3: Drain the washing machine of water.
  4. STEP 4: Remove a drain hose clog.
  5. STEP 5: Remove a drain pump clog.

Why is my washer not draining completely?

Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed. Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be done.

Why is my Whirlpool Cabrio washer not draining?

The most common causes of a Whirlpool Cabrio washer not draining are: If the washer will not drain or it stops draining and displays an “LD” error code, it is usually because of a malfunctioning drain pump or blocked drain hose. The “LD” error code refers to “long drain” and occurs when the washer is taking too long to drain.

What does ol mean on a whirlpool Cabrio washer?

One of the most common codes that appears on a Whirlpool Cabrio washer is the OL error code. The code is basically an overload error. So, sometimes it will be as simple as an overloaded machine. If this code is present on your machine and you can’t clear it, you’ll need to check these two parts:

Are Whirlpool Cabrio high-efficiency washers any good?

A common complaint with Whirlpool Cabrio High-Efficiency (HE) washers is that the load is not completely covered with water. However, Whirlpool advises that this is normal and the quality of the wash will not be affected.

What does LD mean on a whirlpool washing machine?

If the washer will not drain or it stops draining and displays an “LD” error code, it is usually because of a malfunctioning drain pump or blocked drain hose. The “LD” error code refers to “long drain” and occurs when the washer is taking too long to drain.

author

Back to Top