How do I pair my Fritz repeater 310?

How do I pair my Fritz repeater 310?

2 Setting up the FRITZ! Repeater as a wireless bridge

  1. For setup, plug the FRITZ! Repeater into a power outlet near the FRITZ!Box.
  2. Wait about 1 minute until the FRITZ!
  3. Briefly push the WPS button on the FRITZ!
  4. Within 2 minutes: Push and hold down the Connect button on the FRITZ!
  5. The FRITZ!

How do I connect my Fritz repeater to another repeater?

2 Connecting the FRITZ! Repeater with the existing Mesh Repeater

  1. For setup, plug the new FRITZ!
  2. Wait about 1 minute until the new FRITZ!
  3. Briefly push the WPS button on the new FRITZ!
  4. Within 2 minutes: Push and hold down the Connect button on the existing Mesh Repeater for the time indicated in the table:

How do I reset my Fritz repeater?

Restarting the FRITZ! Repeater

  1. Select “System / Backup / Restart” in the user interface.
  2. Click on “Restart”.

How do you connect a WPS to a repeater?

Plug your Range Extender into a power outlet near your main Router/AP. 2. Push the WPS button on your main Router/AP first, then immediately push the WPS button on your Range Extender. Note1: After you have pushed WPS button of your Router/AP, you need to push WPS button of your Range Extender within 2 minutes.

How do I connect to WiFi using the Fritz WLAN repeater?

1. Connect the FRITZ!WLAN Repeater to an electrical outlet in the vicinity of the FRITZ!Box. 2. Press the “WPS” button on the FRITZ!WLAN Repeater. Hold the button down until the “WLAN” LED begins flashing.

What are the operation requirements for the Fritz®WLAN repeater 310?

2.1 Operation Requirements In order to operate the FRITZ!WLAN Repeater 310, you must have the following: †Your WLAN base station (WLAN access point) must sup- port the IEEE 802.11n, 802.11g or 802.11b standard in the 2.4-GHz range. †The WLAN base station must support automatic IP ad- dress assignment (DHCP).

How do I update the firmware of my Fritz®WLAN repeater?

Click “Wizards” and start the “Update Firmware” Wizard. The Wizard checks whether new firmware is available for your FRITZ!WLAN Repeater. If a new firmware is available, the Wizard displays the version number of the firmware. Click the link to view in- formation about the firmware.

How do I enable WPS on my FRITZ Box?

In older FRITZ!Box models, enable the WPS method in the user interface under “WLAN / Security / WPS Quick Connection”. †The WLAN base station must support the WPA or WPA2 encryption standard. †The SSID (radio network name) of the WLAN base station must be set to “visible” (announced).

author

Back to Top