Popular guidelines

How do I reset my brother toner?

author 0

How do I reset my brother toner?

Reset process

  1. Switch-off the printer.
  2. Open the front cover.
  3. Press and Hold the Go button while all the LEDs on the printer’s control panel light-on.
  4. Release the Go button.
  5. Press Go twice.
  6. Press Go 6 times if you want to reset Brother TN-2110 toner cartridge.

How do I reset my brother tn 2465 toner?

Press the OK button and then click the down arrow button to reset the toner. Voila!

Can you reset a toner cartridge?

Press and hold the printer’s start button for at least 10 seconds to reset your printer. Send a print job to the printer before you plug it back in. Once the print job has been sent to the machine, plug it back in and your printer should override the ink cartridge settings.

How do I reset my Brother printer drum?

Reset the Drum Counter

  1. Close the front cover.
  2. Make sure the machine is turned on.
  3. Press. (Settings).
  4. Press All Settings. (This step might be skipped in some models.)
  5. Choose Machine Info. or Machine Information => Parts Life.
  6. Press and hold Drum or Drum Life until the machine’s display message changes.
  7. Press Yes.
  8. Press.

How do I restart my Brother printer after changing toner?

FAQs & Troubleshooting

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Remove the toner cartridge and drum unit assembly from the machine.
  4. Push down the green lock lever and take the toner cartridge out of the drum unit.
  5. Unpack the new toner cartridge.
  6. Remove the protective cover.

How can I trick my HP printer cartridge?

How Do You Trick HP Ink Cartridges?

  1. Remove the new ink cartridge and reload the old ink cartridge back into the printer.
  2. Wait for about 10 minutes before you proceed to the next step.
  3. Remove the old ink cartridge and install the new ink cartridge again.

How do I reset my Brother HL L2300D?

Brother HL-L2300D Toner Reset

  1. Press and Hold the Power button until the machine turns off.
  2. Open the Toner Door.
  3. Press and Hold the Go button until step 5.
  4. Press the Power button.
  5. Release the Go button when the Toner, Paper, and Drum lights are lit.
  6. Press the Go button 9 times.

author

Back to Top