How do I reset my eWON COSY?
How do I reset my eWON COSY?
To perform a first level reset, press and hold the reset button for approximately 4 seconds after powering up the eWON. The USER LED will flash red at about once a second. When this occurs, release the reset button and wait approximately 30 seconds. The eWON will automatically restart and become ready to communicate.
How do I reset my eWON Flexy?
How to generate a second level reset on the Flexy 201/202:
- Power the unit OFF and ON again.
- Immediately press and maintain the reset button.
- Wait approximately 35 seconds until the USR LED remains red steady.
- When this state is reached, release the button.
- It takes no longer than 5 seconds to complete.
How do I set up eWON?
- 1.1 Download and install eCatcher. 1.2 Create your account by clicking on “Create a Free+ Account”.
- 2.1 Download and install eBuddy. 2.2 Connect an Ethernet cable from your computer to the eWON’s LAN port No.
- 2.5 Launch your browser and target the eWON’s LAN IP. The default username & password are both “adm”.
How do I create a Talk2M account?
Once the eCatcher software is installed, you can launch eCatcher to create your Free+ account on the Talk2M server. Click on the “Create a Free+ account” link and the following window will show up: Enter the Account name you want to create and specify the User name, Password and Email address for your account.
How do I connect to eWON Internet?
You can get an access to the Internet, beside the Talk2M-VPN tunnel, if needed.
- Make sure you have full Internet access available.
- Activate the NAT feature on the eWON.
- Allow traffic forwarding.
- WAN connection.
- Gateway address.
- NAT and TF on WAN.
What is eWON COSY?
The Ewon Cosy is an industrial remote access gateway that is designed to offer scalable and secure remote access to machines in the factory. Typical Applications. • Remote access to PLC, IPC, HMI or. IP camera.
What is Talk2M?
Talk2M is the cloud-based connection service that allows you to securely connect to your remotely deployed eWON devices. By utilizing the Talk2M connection service with an account for your organization, you are able to program and troubleshoot your machine’s PLCs remotely, just like you are there.
How does an eWON work?
The Ewon device makes an outbound connecfion via UDP or HTTPS to HMS cloud based VPN servers called (Talk2M). Using the VPN client eCatcher, authorized users are able to log into their FREE Talk2M account and connect to their Ewon router anywhere in the world.
What is EWON device?
How do I reset the Ewon cosy to factory default settings?
• Immediately press and maintain the reset button. The LED labeled BI1 turns ON. • Wait approximately 35 seconds until the USR LED remains RED steady. • When this state is reached, release the button. The LED labeled BI1 turns OFF. . The eWON COSY does NOT restart in normal mode by itself and remains running in this diagnostic mode. mode.
How do I generate a second level reset for the cosy 131?
Page 25 of the Cosy 131 manual reviews this process: How do I generate a second level reset? • Immediately press and maintain the reset button. The LED labeled BI1 turns ON. • Wait approximately 35 seconds until the USR LED remains RED steady. • When this state is reached, release the button.
What happens to the Ewon after a Level 2 reset?
As described before, the eWON returns to its default COM parameters and factory IP addresses (like LAN 10.0.0.53) after this level 2 reset is performed. Cosy is reset. thanks below file to the back file, will try the factory reset
Can the Ewon cosy unit be mounted outside?
The eWON COSY unit has an IP30 protection grade. It is therefore not suited for outdoor mounting. The design of the unit is such that it has to be integrated in an enclosed electrical cabinet, protected from excessive heat humidity and dust.
https://www.youtube.com/watch?v=lpveVlqP9Io
