How do I reset my juniper ex4200 switch?

How do I reset my juniper ex4200 switch?

Reverting to the Default Factory Configuration by Using the Menu Button

1. Press the Menu button until you see MAINTENANCE MENU on the panel.
2. Press the Enter button.
3. Press Menu until you see FACTORY DEFAULT.
4. Press Enter. The display says RESTORE DEFAULT?
5. Press Enter.

How do I reset my juniper to factory settings?

Restore Juniper SRX210 to factory default configuration

1. Power on the Juniper SRX210 by plugging it to the power adapter.
2. Using a pin or paperclip, press and hold the RESET CONFIG button for 15 seconds.
3. Wait about 2 minutes while the Juniper SRX210 restores to the factory default settings.

How do you factory reset a Juniper SRX?

You can use the Reset Config button on the front panel of the SRX device to reset the device to its factory default configuration. The Reset Config button is recessed to prevent it from being pressed accidentally; so you need to insert a small probe (for example, a straightened paper clip) to press the button.

How do I reset my juniper ex3200 to factory settings?

Knowledge Base

1. Press the Menu button until you see MAINTENANCE MENU on the panel.
2. Press the Enter button.
3. Press Menu until you see FACTORY DEFAULT.
4. Press Enter. The display says RESTORE DEFAULT?
5. Press Enter. The screen flashes FACTORY DEFAULT IN PROGRESS and returns to the idle menu.

How do I reset a Juniper switch?

To restart the switch from the front panel:

1. From the LCD front panel menu push the Menu button.
2. When the MAIN MENU (Maintenance menu) appears, press the Enter button.
3. Select the SYSTEM REBOOT option and press the Enter button.
4. To exit the menu without rebooting the switch, press the Menu button again.

How do I factory reset my extreme switch?

Extreme Switch – Reset to factory default

1. Log into the switch, and enter the command unconfigure switch all.
2. The switch will reboot, and boot up with a factory default configuration.

How do you reset a Juniper switch?

How do I delete a configuration in Juniper?

If you need to make changes to the configuration of a device, you can always remove the original configuration settings using the delete command and add your new configuration settings using the set command.

How do I delete all configuration in Juniper SRX?

Execute the Junos OS request system zeroize command to remove all configuration information on the Routing Engines and reset all key values on a device running Junos OS. The command removes all data files, including customized configuration and log files, by unlinking the files from their directories.

How do I reset my juniper srx320?

To press the RESET CONFIG button, insert a small probe (such as a straightened paper clip) into the pinhole on the front panel. By default, pressing and quickly releasing the RESET CONFIG button loads and commits the rescue configuration through the J-Web interface or the CLI.

How do I remove a configuration from Juniper switch?

How long does it take for a Juniper switch to reboot?

This switch is taking approximately 4 minutes 30 seconds.

How does the load factory default command work on EX 4200 switches?

The load factory default command is a standard JUNOS configuration command and works in the standard way when the command is entered on an EX 3200 switch or on a standalone EX-4200 switch. When this configuration command is entered on a single EX 4200 switch, it replaces the current active configuration with the default factory configuration.

Is juniper OS year 2000 compliant?

YEAR 2000 NOTICE Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related limitations through the year 2038. However, the NTP application is known to have some difficulty in the year 2036. END USER LICENSE AGREEMENT

How to revert to the default factory configuration for the EX-series switch?

Reverting to the Default Factory Configuration for the EX-series Switch 1 Reverting to the Default Factory Configuration by Using the Menu Button 2 Reverting to the Default Factory Configuration by Using the Load Factory Default Command More

Where is juniper located in the USA?

Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, California 94089 USA 408-745-2000 www.juniper.net Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the United States and other countries.