How do I reset my Worcester Heatslave 20 25?
How do I reset my Worcester Heatslave 20 25?
The burner can be reset after two minutes by pressing the illuminated lockout reset button located on the burner control box. PLEASE NOTE: Do not attempt to repeatedly restart the boiler as persistent lockout indicates a fault and you should consult a service engineer.
How do you bleed a Heatslave 15 19?
Switch the boiler off. Put the diverter valve in the manual position, make sure the auto air vent on the heatstore is open, open the manual bleed points oon the heat store flow and return and bleed them. Bleed the manual vent on the boiler body. Bleed the pump.
Where is the reset button on a Worcester boiler?
Tell Me How to Reset a Worcester Boiler When you need to reset your boiler, simply press and hold the reset button that can be found on the front of your boiler control panel. You need to hold the button down for 3-5 seconds to ensure that it is reset before re-checking the system to make sure it is working.
How do I reset my Worcester boiler after running out of oil?
10 Steps to Bleed & Restart Your Furnace after Running Out of Heating Oil
- Step 1: Fill the Fuel Tank.
- Step 2: Hit the Reset Button.
- Step 3: Turn off the Furnace.
- Step 4: Collect Your Tools.
- Step 5: Find the Bleeder Valve.
- Step 6: Attach Nylon Tubing.
- Step 7: Turn on the Furnace and Unscrew the Valve.
- Step 8: Tighten the Valve.
Why is my oil boiler not firing up?
Common causes for oil boiler lockout include: A leak in the system causing low boiler pressure. A fault in the thermostat, e.g. a problem with the radio frequency (RF) pairing which means that the boiler does not know when to fire up.
How do you increase pressure on Worcester boiler?
External Filling Loop
- Attach the hose to each side of the valve and open the mains cold tap.
- Open the second tap which allows water in to the heating system.
- Watch the pressure rise and stop once the bar reaches just about one and turn off both taps.
