How do I set my Meaco dehumidifier?

How do I set my Meaco dehumidifier?

Press the ON/OFF button to turn the dehumidifier on or off. The UP and DOWN arrows can be used to select a target relative humidity between 30%rh and 80%rh, CO mode or AP mode. Press the UP or DOWN arrow until you reach your desired target relative humidity.

What does C2 mean on Meaco Zambezi?

Spoke to Meaco engineer who said C2 code is one of 2 things either a fault with the desiccant system or PCB. Told if it only runs for 8 mins then it is likely the desiccant system as it takes that time to do a full rotation.

Why does my Meaco dehumidifier smell?

When you first use the dehumidifier and periodically afterwards you might notice a smell coming from the dehumidifier. This is caused by the Zeolite desiccant material and is not a sign that the dehumidifier is faulty, nor is it harmful to humans or pets.

What RH should I set my dehumidifier UK?

The goal of a dehumidifier is to maintain a lower relative humidity to prevent mould, mildew and dust mites, but leaving it on 24/7 on can rack up a nasty energy bill. Ideally, a domestic home in the UK should have a maximum humidity of 55%.

How does the Meaco dehumidifier work?

A compressor based dehumidifier draws the air in from the room over a filter and passes it over some cold coils similar to the coils on a fridge. As the coils are cold, water condenses and drips into a bucket. The air is then reheated to room temperature and blown back out of the dehumidifier.

How do you set a dehumidifier timer?

Press the “Time” or “Timer” button repeatedly to preset a time of day for the dehumidifier to turn on, if your model has such a function. The timer cycles through the hours of the day as you push the button. Look in your owner’s manual for additional details on setting the timer.

How do I clean the filter on my Meaco dehumidifier?

The Meaco is a top-of-the-line domestic dehumidifier and I would recommend it highly. Turn the panel around and you should see the filter which can be slid in and out of this panel quite easily. Simply hold the panel and slide the filter out. You should notice dust on the filter.

What can I put in my dehumidifier to prevent mold?

With vinegar: You can disinfect your dehumidifier by using the mixture of white vinegar and water in equal quantities. You can use this mixture to wash its tank and scrub its interior with a soft brush to avoid the growth of mold.

What can I put in my dehumidifier to make it smell good?

In addition to running your dehumidifier, place bowls of white vinegar in the area to combat smells. Vinegar is a natural deodorizer that can greatly eliminate odors. You can also boil water with either cinnamon sticks, orange peels or lemon peels on your stove top to help freshen the air with a pleasant aroma.