How do I setup my AT DSL modem?

How do I setup my AT DSL modem?

Connect filters and cables

  1. Install line filters.
  2. Connect a phone cable between the phone port on the gateway and the phone or device sharing the dual-port filter.
  3. Connect the green data cable to your wall jack or the DSL/HPNA port on the dual-port filter and the DSL/Broadband port on the gateway.

What is needed for DSL installation?

A Wi-Fi® gateway or AT-compatible DSL modem – These are the devices that get your computer online. With a Wi-Fi, Ethernet, or USB connection, your home computers can securely connect to and share your internet. Line filters – They connect to your phone jacks if you have DSL service.

How do I activate DSL?

Step 1: Connect Your Modem Wait until the power light turns solid green. Next, connect one end of the phone jack cord into the “DSL” port on the modem (the green port) and wait 4-6 minutes for the DSL light to turn solid green, indicating that the modem is ready to be activated.

Do I have to use ATT modem?

AT requires you to use their gateway for their fiber service. You can disable the router portion (pass through mode) and connect a much better router to it. There is also a way to use your own modem but AT will still charge you the monthly fee regardless of what you do once you signup for the service.

Why is my DSL not connecting?

Power-cycle the DSL modem Turning the modem off and back on causes it to re-synchronize the DSL signal and the network connection to your computer. Often, this by itself is enough to fix a DSL connection problem. To do this, unplug the power cord from the DSL modem, wait about 30 seconds, then plug it back in.

Is Netgear CM1000 compatible with AT?

Currently certified with Spectrum and Cox (up to 1Gbps), Xfinity (up to 800Mbps). Not compatible with Verizon, AT, CenturyLink, DSL providers, DirecTV, DISH and any bundled voice service. Save monthly rental fees: Model CM1000 replaces your cable modem saving you up to dollar 168/year in equipment rental fees.

Can I upgrade my ATT modem?

Upgrade or replace your high speed modem. To upgrade your modem or gateway, visit the AT Equipment Shop to review the current offerings and submit your order online.

How do I install a coaxial cable to my modem?

Installing Attach one end of the coaxial cable to the cable output. Attach the other end of the cable to the input on your modem. Plug your modem’s power cable into an electrical outlet. Insert the modem power cable’s free end into the modem. Place your modem in its spot. Attach the modem to a router.

How do I connect my modem to my router?

Attach the modem to a router. If you have a Wi-Fi router that you want to use in conjunction with your modem, plug one end of an Ethernet cable into the square port on the back of the modem, then plug the other end into the “INTERNET” (or similarly labeled) square port on the back of the router.

How do I connect a miniature USB modem to my computer?

There are miniature USB modems that you can connect to your computer by inserting the USB end of the modem into your computer’s USB port. These modems typically connect directly to Ethernet cables that are used for phone lines, meaning that your Internet speed will be incredibly slow while using one.

What should I do when my modem powers up?

Heads up: Don’t unplug the power adapter or data cable while the modem powers up because that can damage the gateway. If you’re a new user, you’ll be asked to set up your security questions and answers. The online activation process should start automatically.


Back to Top