Other

How do I update NetApp Service Processor firmware?

author 0

How do I update NetApp Service Processor firmware?

Click the SP_FW. zip link to download the file from the NetApp Support Site to your HTTP server. When the system prompts you to update the SP, enter y to continue. The SP is updated and you are prompted to reboot the SP.

What is NetApp service processor?

The Service Processor (SP) is a remote management device that enables you to access, monitor, and troubleshoot a node remotely. You can then use the SP CLI to monitor and troubleshoot the node remotely. In addition, you can use the SP to access the serial console and run Data ONTAP commands remotely.

What is a NetApp BMC?

The Baseboard Management Controller (BMC) provides remote management capabilities including console redirection, sensor monitoring, logging, and power control. It also extends AutoSupport by sending additional system event alerts.

How do I check my NetApp log?

Viewing OnCommand System Manager log files

  1. Enter your cluster administrator credentials, and then click OK.
  2. In the Clustered Data ONTAP – Root Volume File Access window, click the logs link for the node that hosts the cluster-management LIF.
  3. Navigate to the mlog directory to access the System Manager log files.

How do I access netapp service processor?

There are two ways to access the SP: From the serial console port, access the SP shell by pressing Control-G; press Control-D to end the session. From an Ethernet connection, access the SP through SSH. The SSH connection will prompt for a username and password.

How do I access my netapp BMC?

There are two ways to access BMC:

  1. From the serial console port, access the BMC shell by pressing Ctrl+G and end the session by pressing Ctrl+D.
  2. From an Ethernet connection, access the BMC through SSH.

How do I view logs in NetApp 7 mode?

To display the contents of the event log, use the ems log dump command. You specify the period of time by specifying the number of hours or days, as shown in the following examples. Hi, To display the contents of the event log, use the ems log dump command.

What is BMC used for?

A baseboard management controller (BMC) is a small, specialized processor used for remote monitoring and management of a host system.

What is integrated BMC console?

The Intel® Integrated BMC Web Console is part of the standard BMC firmware/Server Management Software. The Integrated BMC Web Console feature is used to access the remote KVM. In order to access the web console using a securely encrypted connection, you will need a browser that supports the HTTPS protocol.

How do I run Autoapp on NetApp?

  1. Create an aggregate.
  2. Decide where to provision the new volume. Create a basic SVM.
  3. Create and configure a volume.
  4. Create a share and setting its permissions.
  5. Create an export policy for the volume.
  6. Verify SMB client access.
  7. Verify NFS access from a UNIX administration host.
  8. Configure and verify CIFS and NFS client access.

How do I upload files to NetApp support?

Uploading a support bundle

  1. Open a support case to obtain a case number in one of the following ways:
  2. Go to the NetApp File Upload Utility site and enter the required information when prompted.
  3. Enter the case number obtained in Step 2.
  4. Select the file type as Non-Core from the list.
  5. Upload the support bundle.

How do I check the status of the Service Processor firmware update?

You can use the command system service-processor image update-progress show to check the progress of the update. This parameter specifies the node whose Service Processor’s firmware is to be updated. This parameter specifies the package that will be installed.

What does the system service-processor image update command do?

The system service-processor image update command installs a new firmware version on the Service Processor of specified node in a cluster. If this command fails, it will display and log an appropriate error message and abort.

What does the service processor package specification do?

This parameter specifies the package that will be installed. You can find the package file in the SP Update Repository field of the system node image package show command. If you do not specify this parameter, the Service Processor is updated to the most recent version of the firmware that is available in the update repository.

author

Back to Top