How do I use Epson automatic document feeder?
How do I use Epson automatic document feeder?
In the EPSON Scan main window, select ADF-Single-sided or ADF-Double-sided from the Document Source list. Also choose the appropriate settings for scanning. Click Scan. The pages are fed into the scanner and scanned.
Why is my ADF not working?
SOLUTION: If your automatic document feeder is not working correctly with your ScanSoft product, check to make sure the document feeder is properly connected and not jammed. Then turn the scanner and document feeder back on, restart your computer, and try scanning with your ScanSoft product again.
Why ADF is not working on Epson?
Make sure you have selected either Office Mode or Professional Mode in Epson Scan. See Changing the Scan Mode for instructions. Make sure Auto Detect (Office Mode only) or ADF is selected as the Document Source setting in Epson Scan. If the ADF is open, close it and try scanning again.
Why does my scanner keep jamming?
More often than not, repeated “paper jams” are a false alarm caused by accumulated dirt or ink on the image sensor that cause the scanner to stop. Simply cleaning the scanner can solve this problem. Often times, though, the root cause is that there’s ink smeared on the image sensor glass.
How do you fix a paper jam on an Epson scanner?
If paper has jammed inside the product, follow the steps here to clear the jam.
- Cancel the print job, if necessary.
- Remove any jammed paper from the rear paper feed slot.
- Lift the scanner unit.
- Remove any paper inside, including torn pieces.
- Close the scanner unit.
How do I turn off automatic document feeder?
Click on Configuration > Button Settings > Device Settings > Device Scan Settings. Uncheck the Auto Crop setting. Click Apply > OK. Attempt to scan again using the ADF.
How do I clean my document feeder?
Open the ADF access door (1) and the roller cover (2) inside the ADF. Wipe the ADF rollers with a clean, damp, lint-free cloth. Wait several minutes for the rollers to dry, and then close the ADF roller cover and access door.
How do I fix my scanner jam?
Follow these steps in the order presented to check the ADF mechanism for a paper jam.
- Lift the scanner lid.
- Lift the ADF mechanism.
- Check for jammed paper in the ADF mechanism.
- Gently pull the paper out of the ADF mechanism.
- Gently lower the ADF mechanism.
- Close the ADF cover, and then close the scanner lid.
