How do you reset a Fritz repeater 310?

How do you reset a Fritz repeater 310?

Loading the FRITZ! Repeater’s factory settings

1. Plug the FRITZ! Repeater in.
2. Wait about 1 minute until the FRITZ!
3. Push and hold down the WPS button down for about 15 seconds until all of the LEDs flash at the same time.
4. The Power and WLAN LEDs remains lit as soon as the factory settings have finished loading.

How do I setup my Fritz WLAN Repeater?

How do I install and configure my FRITZ! WLAN Repeater

1. Plug the FRITZ! WLAN Repeater into an outlet near the FRITZ!Box.
2. Press the “WPS” button on the FRITZ! WLAN Repeater for about 6 seconds until the “WLAN” LED flashes.
3. Hold down the “WLAN” button on your FRITZ!Box until the “WLAN” LED flashes (6 seconds).

How do I access my Fritz repeater?

You can either enter http://fritz.repeater or the IP address (http://192.168.178.2 in the factory settings) to open the user interface. Always enter the complete address http://fritz.repeater.

How do I reset my Fritz repeater 3000?

Push and hold down the Connect button for about 15 seconds. The Connect LED now indicates by alternately flashing and lighting up that the factory settings are being loaded and that the FRITZ! Repeater is being restarted. This process may take several minutes.

Where is the password for Fritz repeater?

2 Resetting the password

1. Open the user interface of the FRITZ! Repeater.
2. Click the “Forgot your password?” link.
3. Click the “Send push service mail” button.
4. Call up the email with the same device you used to request the push service mail and follow the instructions in the email.

How do I reset my Fritz repeater 2400?

Push and hold down the Connect button for about 15 seconds. The status LED now indicates by alternately flashing and lighting up that the factory settings are being loaded and that the FRITZ! Repeater is being restarted. This process may take several minutes.

How do you set up a Fritz 310 repeater?

2 Setting up the FRITZ! Repeater as a wireless bridge

1. For setup, plug the FRITZ! Repeater into a power outlet near the FRITZ!Box.
2. Wait about 1 minute until the FRITZ!
3. Briefly push the WPS button on the FRITZ!
4. Within 2 minutes: Push and hold down the Connect button on the FRITZ!
5. The FRITZ!

How do I connect my Fritz repeater 2400 to My Vodafone router?

Setting up the FRITZ! Repeater as a wireless bridge

1. For setup, plug the FRITZ!
2. Wait about 1 minute until the FRITZ!
3. Briefly push the WPS button on the FRITZ!
4. Within 2 minutes: Enable WPS on the wireless router, for example by pushing a WPS button or register button on the wireless router.
5. One or more of the FRITZ!

What are the operation requirements for the Fritz®WLAN repeater 310?

2.1 Operation Requirements In order to operate the FRITZ!WLAN Repeater 310, you must have the following: †Your WLAN base station (WLAN access point) must sup- port the IEEE 802.11n, 802.11g or 802.11b standard in the 2.4-GHz range. †The WLAN base station must support automatic IP ad- dress assignment (DHCP).

How do I connect to WiFi using the Fritz WLAN repeater?

1. Connect the FRITZ!WLAN Repeater to an electrical outlet in the vicinity of the FRITZ!Box. 2. Press the “WPS” button on the FRITZ!WLAN Repeater. Hold the button down until the “WLAN” LED begins flashing.

How do I update the firmware of my Fritz®WLAN repeater?

Click “Wizards” and start the “Update Firmware” Wizard. The Wizard checks whether new firmware is available for your FRITZ!WLAN Repeater. If a new firmware is available, the Wizard displays the version number of the firmware. Click the link to view in- formation about the firmware.

How do I enable WPS on my FRITZ Box?

In older FRITZ!Box models, enable the WPS method in the user interface under “WLAN / Security / WPS Quick Connection”. †The WLAN base station must support the WPA or WPA2 encryption standard. †The SSID (radio network name) of the WLAN base station must be set to “visible” (announced).