How do you use TransTint dye on wood?
How do you use TransTint dye on wood?
Apply the dye with a rag, brush or sponge, and work it quickly to cover the surface. Get the entire surface wet with dye until it’s uniformly saturated then remove the excess dye before the wood starts to dry out. If you get lap marks, you can use a dye moistened bit of cloth or rag to even things out.
What can I mix with TransTint?
Mix with Alcohol: As with water, the ratio of 1 ounce dye to 1 quart of alcohol is a starting point, and you can increase or decrease solvent to suit your need. Mix with Water & Alcohol: A 50/50 mix of water and alcohol is a very satisfactory solvent for applying TransTints.
Can you color 5 min epoxy?
Loctite Epoxy Instant Mix 5 Minute does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled.
Is it better to spray or wipe on stain?
The most common method of staining is to apply a wet coat and wipe off all or most of the excess before the stain dries. Any application tool can be used to apply the stain – rag, brush or spray gun, or you can dip, then wipe.
What is gel stain?
Gel stains are thick stain that you apply to a wood surface. Unlike traditional stains that soak into the wood creating a new color, gel stains are applied to the surface of wood and can be built up similar to a paint. Unlike paint, gel stains still allow you to feel the underlying texture of the wood.
How do you stain mission brown with General finishes?
Stain with TransTint Dark Mission Brown diluted at 1 oz dye to 1 qt. water. Apply one coat General Finishes SealACell Sealer. Let dry one day and scuff sand with 320 grit. Apply General Finishes Java Gel Stain. Wipe clean and let dry overnight. Apply 2 coats General Finishes ArmRSeal Satin Finish.
How do you stain Oak Park mahogany?
* To produce the “Oak Park” color, use Dark Mission Brown mixed at the ratio of 1 oz dye to 2 qt water. Use General Finishes Brown Mahogany Gel Stain. Stain with TransTint Brown Mahogany diluted at 1 oz dye to 2 qt.* water. Apply one coat General Finishes SealACell Sealer.
What color is transtint Brown?
Click here to order any of the Transtint colors. A very dark brown with a hint of red. Great as a dark shader and toner. Similar to van dyke brown. Click here to order any of the Transtint colors. A “cool” brown with yellowy undertones.
What is the best stain for quartersawn white oak?
One of the qualities that make quartersawn white oak attractive is its distinctive pore structure. By emphasizing these pores with a dark glaze, the true Mission effect is achieved. Use gel stain (our favorite is General Finishes) as noted in the instructions for each sample.
https://www.youtube.com/watch?v=1QGHxi2G7Iw
