How much carpet do I need for Hall stairs and landing?
How much carpet do I need for Hall stairs and landing?
Multiply the landing’s length times its width. This will give you the total area of the landing (and the riser just below it). Add this number to the total area of the stairs to calculate the total surface you’ll need to purchase carpet for. In our example, your landing measures 4 by 5 feet (1.2 m × 1.5 m).
How much carpet do I need for 13 stairs?
How much carpeting for 13 stairs? You’ll need between 80 and 110 square feet for 13 stairs.
How do I measure stairs and landing for carpet?
Measure from the top of the stairs to the bottom as this is the way the pile direction will go. Measure the width and depth of the doorways of your landing and hallway and jot down this information on your plan. Make sure to measure any drop backs or alcoves on the landing and hallway.
How many feet of carpet do I need for a staircase?
The usual allowance for the tread (the flat part you step on) is 10″, and 8″ for the riser (the back of the stair). Therefore, for every box stair, you require 3′ (or the width of your stair) x 18″ of carpet.
What is the best carpet for stairs and landing?
The best carpet for stairs has a low pile—¾-inch or less—to be both more stable underfoot and resilient to traffic. A synthetic plush style in twisted or cut pile is always a safe option, while a looped style like Berber is occasionally avoided (particularly if you have pets whose claws may catch in the carpet loops).
How many square feet is a normal staircase?
A standard staircase occupies 30-square-feet of space above and below the staircase. This is the most common dimension, given an 8-foot ceiling, where the staircase width measures 3-feet (36-inches) and horizontal floor space occupied measures between 9- to 10-feet.
How much carpet do I need for 12 stairs?
For a typical set of 12 box stairs, you’ll multiply the 36” width by the 18” tread and riser, then multiply by 12 stairs. The total is 7776 square inches of carpet, which equates to 54 square feet.
How do you measure hall stairs?
A halls length is always determined by facing the staircase, to your right and left is its width, to your front and behind is its length The same applies to the landing when stood facing the steps, to your left and right is its width, front and behind is its length.
How do I choose a stair carpet?
Because the stairs get the heaviest footfall, the carpet needs to be hard-wearing enough to stand up to such wear and tear. It should be easy to clean and resistant to dirt and other stains. And for safety, it can’t be too thick that it causes you to trip on your way down. You also want it to look good!
Is Saxony carpet good for stairs?
A high-grade textured Saxony is a good choice for busier areas of the home, such as stairs and family rooms. A straight Saxony usually looks best in more formal areas, such as living rooms or parlors.
How big should a stair landing be?
The minimum recommended stair landing length is 36″ (or a length and width sufficiently greater than the swing of the door if a wider door is present). This stairway landing or platform dimension is often also expressed as “a minimum of 36-inches in the direction of travel.
How do you measure a landing area for carpet?
When measuring a landing area for carpet, it’s important to note that measurements will need to include the top step of the stairs as well as the landing. The inclusion of the top step is so that the landing carpet flows over the top step and seamlessly into the stairs once fitted.
How do you calculate how much space for carpet on stairs?
Multiply the area of one stair step by the number of steps. This is the total area, or square footage, for the stairs you plan to carpet. Divide the total area by 9 to determine the number of square yards needed. Alternately, enter the measurements into an online carpet calculator.
How do you measure a stair step for a landing?
The edge of the step is called the ‘nose’. The vertical part is called a ‘riser’. The landing plan will need to include the top stair in its measurements. Start measuring from the doorway or wall opposite the top step then run the tape measure all the way over the nose of the top stair and down to the tread.
Why choose our hallway and stairs carpets?
Available in a selection of plain, textured and striped designs that complement classic and contemporary interior design schemes alike, our hallway, stairs and landing carpets also benefit from proven stain and wear resistance, backed by comprehensive guarantees and warranties, for added peace of mind.
