How much horsepower can a 200-4R transmission handle?
How much horsepower can a 200-4R transmission handle?
about 550 horsepower
The stock TH200-4R input shaft is safe to about 550 horsepower. Shown here is the end of the shaft that fits into the overrun drum at the rear of the transmission.
Is the 200r4 a good transmission?
Its bellhousing, drive shaft, and mechanical speedometer make it a superior fit for vintage cars, and its sturdier build and better torque capacity make it the better non-electronic 4-speed overdrive transmission for classic GM performance builds.
What cars did the 200r4 come in?
200-4R Transmission Spotlight
- 1981-’90 Cadillac Fleetwood, Deville and Brougham.
- 1981-’88 Buick LeSabre, Electra RWD, Chevelle, Monte Carlo, Malibu & El Camino.
- 1982-’90 Chevrolet Impala, Caprice, Olds Delta 88, 98 & Custom Cruiser.
- 1984-’87 GMC Caballero & Pontiac Grand Prix.
- 1983-’88 Olds Cutlass 442 & Supreme.
How do I identify a GM 200r4 transmission?
You can find a donor TH-200-4R in one of these cars: The transmission identification is on a plate on the right side of the case towards the tailshaft. This ID plate is attached by one rivet. The plate will have a two- or three-letter transmission code in large letters.
How much does a 200 4R transmission weigh?
The solution came in the form of a simple bolt-in silver bullet: a California Performance Transmission (CPT) 200-4R overdrive automatic….
| The Ratio Game | ||
|---|---|---|
| Gear | TH400 | 200-4R |
| Weight (no converter) | 141 pounds | 124 pounds |
What is a 700R4 transmission?
The 700R4, also known as Turbo Hydra-Matic, is a 4-speed automatic transmission that was launched by General Motors in the early 1980s. It is an upgrade to the 3-speed TH350 automatic transmission and older models of rear-wheel-drive cars.
What is the length of a 200r4 transmission?
The 200-R4 has an overall length of 27 11/16 inches and a bell housing height of 19 1/8 inches. The distance from the center bearing cover retainer bolts to the rear of the transmission case measures 27 inches and the spacing between the retainer bolts equals 3 ¾ inches.
How do I adjust my cable 200r4?
Locate the Adjust Tab on the cable housing. Press in the tab and push the slider as shown in Figure 3. b. Release the tab and rotate the throttle lever to WOT and the cable will self adjust itself as evidenced by a few audible clicks.
Whats better a 200r4 or a 700R4?
There is also the longer nature of the 700R4 which requires certain modifications in order to cross member and driveshaft. Conversely, the 200-4R can be made to be stronger than the 700R4. It is, however, worthy to note that the 200-4R is popularly known as the weaker of the 200-4R/700R4 pair.
How much does a 200-4R transmission weigh?
Which is better 4L60E or 700R4?
If the transmission has a large 18-pin electronic connector above the passenger side pan rail, it’s a 4L60E, as seen here. If it has a cable connection near the cooler lines on the passenger’s side, that’s a 700R4. The good news is that either way, you win.
