How much HP can you get out of a Ford 460?
How much HP can you get out of a Ford 460?
But if you want to talk cast-iron overkill, perhaps we should speak of the Ford 429/460. Massive 3-inch main bearings and hefty iron heads combined at one time in the smog era to put out a measly 206 hp. Thank god those days are over.
What can 460 be stroked to?
Auto Machine transform a 460 into a stump-pulling 501ci stroker with over 500 lb-ft of torque from 2,300 to 5,300 rpm. See all 20 photos Ford 429 and 460 blocks share the same 4.36-inch bore diameter but juggled stroke to get 429 (3.59-inch stroke) or 460 (3.85-inch stroke) cubic inches.
What year Ford 460 had the most horsepower?
This is the most powerful of all of the 460s. In 1972 Ford reduced the compression ratio in an effort to get better fuel economy out of the engine. This resulted in the 1972 through 1984 460s producing 212 horsepower and 342 pound-feet of torque.
How many MPG does a 460 engine get?
The 460 engine from Ford is used in trucks and large cars like Lincolns. These engines are not fuel effecient, and some vehicles they are used in get less than 10 miles per gallon.
How much horsepower does a 429 Cobra Jet engine have?
429 Cobra Jet Performance Specs The power of this engine made it very popular for performance enthusiasts. The 429 Cobra Jet was advertised as having 370 horsepower at 5400 RPM and 450 lbs-ft of torque at 3400 RPM.
What is the biggest Ford big block?
Ford 385 engine
| Ford 385 V8 | |
|---|---|
| Configuration | Naturally aspirated Big-block V8 |
| Displacement | 370 cu in (6.1 L) 429 cu in (7.0 L) 460 cu in (7.5 L) |
| Cylinder bore | 4.360 in (110.7 mm) |
| Piston stroke | 3.59 in (91.2 mm) 3.85 in (97.8 mm) |
What year did Ford come out with the 460 big block?
1968
Ford’s most popular, longest-lasting big block V8 engine lived an incredibly varied life. The 460 cubic inch eight-cylinder motor debuted all the way back in 1968 but found itself powering cars, trucks, and commercial equipment all the way to the end of the 1990s during its three decade run.
How much horsepower does a 1996 Ford 460 have?
Engine Specifications The gasoline engine produces 245 horsepower at 4,000 rpm and 400 pound-feet of torque at 2,200 rpm.
How much horsepower does a 1978 Ford 460 have?
Using the new ‘SAE net’ horsepower rating the 460 coasted along around the 200 pony mark for much of the rest of the decade, with torque measured at just under 350 lb-ft. In 1978 Ford pulled the 460 from all of its passenger vehicles, Mercury and Lincoln included.
What year did Ford stop making the 460?
1978
1978 marked the final year of the 460 in Ford and Lincoln-Mercury full-size cars, coinciding with their downsizing. For 1980 to 1982, the 460 was exclusive to the Econoline 350, as the 400 V8 became the largest engine for F-Series trucks; for 1983, the 460 made its return to the F-Series (replacing the 400).
How much horsepower did the 426 Hemi really have?
MoPar 426 Hemi The 426 street Hemi was rated at 425 horsepower from the factory. This Chrysler dyno sheet from decades ago and this close-to-stock dyno session of a new 426 Hemi both put the gross horsepower rating at about 470 horsepower without full exhausts and other engine-driven accessories.
What kind of stroker kit do I need for a 460?
Off-the-shelf stroker kits are commonly available for the 460 engine. This kit consisted of a 4.500” stroke forged micro-polished crankshaft, forged pistons with 35 cc dish, SFI approved damper, and 6.700” H-beam connecting rods. Any automotive enthusiast would agree that the quest for more power is the true addiction.
What is a Ford Big Block Stroker?
This is the most radical Ford Big Block stroker setup, using a long 4.500″ stroke to produce a huge cubic inch displacement. Due to the long stroke this combo makes monster torque, although at the expense of top-end RPM.
What is the difference between a Ford 429 and 460 engine?
Another engine of the Ford family that is still gaining steam is the 385 series, most commonly known as the 429 and 460. Both blocks share the same bore of 4.36” but have different strokes. The 429 has a stroke of 3.59” and the 460 has a stroke of 3.85”.
What is the stroke size of a stroker?
Whether the kit is intended for stock replacement or racing, various levels of compression will allow for improved performance with emphasis on top-end power and high RPM. This is a mild stroker setup, featuring a 4.150″ stroke and bore sizes ranging from 4.390″ (502) to 4.440″ (514).
