How thick is tubing for a roll cage?

How thick is tubing for a roll cage?

The roll cage must be constructed of magnetic steel tubing that is a minimum of 1 ½” in diameter, with a minimum tubing thickness of . 095 (wall thickness).

What size tubing is used for RZR roll cage?

Although there are a variety of possible sizes for custom and aftermarket Polaris RZR roll cages, most use either . 095-inch or . 120-inch tubing. The wall thickness of a factory RZR roll cage is only .

What metal is used for roll cages?

Cage materials typically include hot rolled electrically welded (HREW) steel, drawn over mandrel (DOM) steel, and chromoly DOM steel. In respective order, they increase in strength but also increase in price.

What gauge is a roll cage?

ROLL POD FOR 1.75″ ROLL CAGE, FITS 2-1/16″ GAUGE, BLACK.

How much Tube do you need for a roll cage?

How much tubing do you need for a roll cage? The length of tubing for a roll cage depends on its design. For a basic 4×4 roll cage, it is recommended to have 4-6 tubes of 20 feet each. Remember that some material is always wasted in the building process, so it is good to have one spare tube.

What size is a stock RZR cage?

The stock roll cage, also called a cab frame, provided on the basic Polaris RZR is a black-powder-coated painted rolled aluminum, with overall dimensions of 63.75 inches long by 35 inches wide by 42.5 inches high.

Can Am X3 stock roll cage diameter?

The diameter of both the two-seater and four-seater Maverick X3 roll bars are 1.85 inches, with some top crossbars measuring 1.5 inches and the rear harness bars measuring 2.5 inches in diameter.

How many feet of tubing do you need for a roll cage?

Can you use square tubing for a roll cage?

Square tube is stronger in beam strength. For a roll cage, the ease of bending makes round the winner. The sweeping bend of a round tube is stronger than the sharp, mitered joint required by square or rectangular tube.

How is DOM tubing measured?

As previously mentioned, tubing is measured by its outside diameter or dimensions and the wall thickness. For example, we like to use 1.75 inch x . 120-wall DOM. That would be 2 inches square on the outside and 1.5 inches square on the inside.

Is DOM tubing stronger?

This process creates a tube that has a yield strength of around 70ksi. The DOM is simply stronger, can take more punishment and is best suited for use against rocks.