How to apply septone hammer finish?
How to apply septone hammer finish?
Apply by conventional or airless spray. Apply a mist coat and allow to ‘tack off’, then follow with a full even single coat. NOTE: the heavier the coat, the larger and more pronounced the pattern, however sagging must be avoided. Tradepaints Hammer Finish is normally supplied ready for use.
What is a hammered finish?
Hammer paint (or hammered paint) is a special lacquer with a surface that looks like hammered metal when dried. It is also known as hammertone.
Can you thin hammertone paint?
It is not normally necessary to thin the paint at all for roller application. Direct To Rust: For conventional spraying the thinning rate is 15% with Hammerite Brush Cleaner & Thinners. To achieve best results leave one hour between coats to minimise any sagging or runs. 2.
How do you paint hammer tones?
Maybe you want to apply the hammertone paint. But you never used it before. So, you’re scratching your head and thinking about it….
- Step 1- Clean the surface.
- Step 2- Smoothen the surface.
- Step 3- Apply the hammertone paint.
- Step 4- Wait for the paint to dry.
- Step 5- Reapply the paint.
What does it mean to be hammered?
Slang. extremely intoxicated from alcoholic liquor or a drug: On the weekends we usually get hammered.
How do you use hammer tone paint?
Application Stir contents thoroughly using a flat stirrer before and during use. After proper surface preparation, apply a mist/tack coat to the surface, then one full coat evenly sprayed. Clean equipment with Omega General Purpose Thinner.
How do you use hammered finish paint?
The process of applying hammertone paint is so simple that even a beginner can do it….
- Step 1- Clean the surface.
- Step 2- Smoothen the surface.
- Step 3- Apply the hammertone paint.
- Step 4- Wait for the paint to dry.
- Step 5- Reapply the paint.
