Is split face block structural?
Is split face block structural?
Splitface Concrete Blocks have a deep textured relief which gives depth to the unit while also exposing the inner aggregates. This lends itself to customization through the use of different colored aggregates. Both structural an non-structural Splitface concrete blocks are available.
Is split block bad?
Disadvantages of Split Faced Block The durability of split faced block often causes the homeowner to over look the preventative maintenance needed to help prevent the block from absorbing water which can lead to interior wall damage and mold. The installation of the block is also important.
How often should split face block be sealed?
every 5 to 7 years
Before: Split face block is extremely porous and needs to be sealed every 5 to 7 years. After: Clearcoat sealants do not leave any residue on the block. Before: Split face block is very porous and susceptible to water penetration.
How much does it cost to seal split block?
The word on the streets is that you will always have to seal the block, which can cost typically $6K-20K for a typical 3 flat condo building. There are lots of conversations on the type of sealer, clear vs the heavy paint-looking sealer, or an elastomeric sealer.
How long is a split face block?
In addition to color, split face concrete blocks come in a variety of shapes and sizes, so we are sure to have what you need. Typical standard finish dimensions are 7 5/8” x 15 5/8”, while nominal bed depth sizes include 4″, 6″, 8″, 10″ and 12″.
Can you paint split face block?
Split-face will typically require twice as much primer and paint than smooth block. The multiple coats of primer will help fill the porous split-face block. We typically use 100% acrylic coating as they outlast oil paints by a wide margin. A sprayer will likely be used to apply the coatings.
How much does a split face block cost?
Meanwhile, the National Association of Home Builders stated on its website that the average cost of a split-faced block is around $2.30 per block or $2.59 per square foot. Other sources say that in Southern California, split blocks cost between $2.80 and $3.15 each, depending on the color and manufacturer.
What are all these problems with split faced block?
The problems seen with many split faced block buildings have been the result of water intrusion. The symptoms include water stains and bubbling paint on ceilings and walls, warping and buckling hardwood floors, water dripping from exterior wall outlets and light switch boxes, musty smells and mold formation.
What size is split face block?
For example, at Lowe’s, an 8-in x 8-in x 16-in split face block, which is the standard size sold at most hardware stores, retails for a pinch more than $3. At Menard’s, the same size is about the same price.
How much does split faced block cost?
For a basic project in zip code 47474 with 120 square feet, the cost to Install Split Face Block starts at $11.70 – $12.94 per square foot*. Actual costs will depend on job size, conditions, size options.
