What does spindle bore mean on a lathe?
What does spindle bore mean on a lathe?
That is the hole threw the head stock.
What does swing over bed mean on lathe?
Swing over bed. The diameter of the largest workpiece that can be rotated on the spindle without hitting the bed. This is the first of the two numbers used to describe the size of a metal lathe.
Can we do drilling on lathe machine?
The tailstock of a lathe can be used for drilling, with the aid of a drill chuck attachment. The drill chuck has a morse taper shaft which can be push into the shaft of the tailstock, locking it in position. If a large diameter hole is needed then a small hole is drilled first (eg. 4mm dia).
What are the two main purposes of the lathe spindle?
The bed, the headstock, the tailstock, and the carriage. What are the two main purposes of the lathe spindle? To hold and rotate the workpiece during machining. You just studied 9 terms!
What is the cross slide on a lathe?
Definition of cross slide : a member of a machine (as of a lathe) on which the tool carriage moves at right angles to its principal direction of travel.
How drilling is done in lathe machine?
Drilling is the operation of producing a cylindrical hole in a workpiece. It is done by a rotating tool, the rotating side of the cutter, known as a drilling drill. In this operation, The workpiece is revolving in a chuck or a faceplate and the drill is held in the tailstock drill holder or drill chuck.
What are the dimensions of a lathe?
Most hobbyists and craftsmen working on smaller pieces will find that a 3″ x 15″ lathe is typically as small as one should go, while about double that size, 6″ x 30″, forms the upper end of what a home lathe can be. Weight – Be aware that like many pieces of machinery, lathes can be quite heavy.
What is the definition of spindle?
Definition of spindle. (Entry 1 of 2) 1a : a round stick with tapered ends used to form and twist the yarn in hand spinning. b : the long slender pin by which the thread is twisted in a spinning wheel. c : any of various rods or pins holding a bobbin in a textile machine (such as a spinning frame) d : the pin in a loom shuttle.
What is spindle turning?
Spindle turning. Spindle turning, or turning between centers, is a woodturning method referring to a piece of wood on a wood lathe that is being turned on its center axis. Method. Wood is generally removed by running a turning tool down the slope of the wood from a larger diameter in the wood to a smaller diameter.
What is a wood spindle?
A spindle is a woodworking machine rotating on a vertical axis in which shaped cutters are mounted for cutting mouldings, rebates and similar features in wood. It does (usually on a bigger scale) many of the non-routing jobs done by a modern portable (spindle) router.
