What is a carriage belt?
What is a carriage belt?
HP Designjet 800 and HP Designjet 500 carriage belt connects the carriage to the motor. It runs the length of the plotter and moves the carriage left and right. This belt is for the 24″ print width HP 800 plotter and HP 500 plotter.
How do I calibrate my HP Designjet 500?
Color calibration
- From the main menu on the front panel, select the Ink System iconand press ENTER. Figure : Ink system icon.
- Select Color calibration and press ENTER. Figure : Selecting Color calibration.
- Select Status and press ENTER.
- If the paper loaded is not as displayed, choose Calibrate paper, as shown in Figure 12.
How do I reset my HP Designjet 500?
HP Designjet 500 or 800 series Press the Up or Down Arrow until Card Setup is on the display, then press ENTER. Press the Up or Down Arrow until Advanced is on the display, then press ENTER. Press the Up or Down Arrow until Reset card is on the display, then press ENTER.
How do I reset my HP 510?
To remove all calibrations and reset the Printer to its factory values, choose Color calibration>Reset from the Ink menu….Color Calibration
- From the main menu on the front panel, select the Ink System icon (Figure 8) and press ENTER.
- Select Color calibration (Figure 9) and press ENTER.
How do I restore my HP Designjet 500 to factory settings?
How do I fix my HP printer?
Resolving Print jobs stuck in queue and other printing problems using the HP Print and Scan Doctor
- Windows: Download HP Print and Scan Doctor.
- Run HPPSdr.exe from the download location on your computer.
- Once HP Print and Scan Doctor is open, click Start, and then choose your printer.
- Click Fix Printing.
How do I reset my HP Designjet printer?
Follow the instructions below….Network Card Reset:
- With the printer turned on and the network cables connected, press in and hold down the Power button.
- Press the Cancel button three times and release.
- Press the OK button one time and release.
- Now release the power button.
- Turn the printer Off, then On.
Why has my HP printer suddenly stopped working?
Make sure your devices are properly connected with each other, and the network or the cable you use to connect these devices is normal. You can also try restarting your HP printer. Turn it off completely and unplug the power cord, leave it for a couple of minutes, and then plug the cord back and power on the printer.
What is wrong with HP printer?
Among the most common problems with any make of printer are paper jams. A printer will jam for any number of reasons: It’s dirty, the wrong paper type is being used, or the rollers on the printer that feed the paper through its pathway are worn down. Certain HP printers are more susceptible to paper jams than others.
How big is the belt on a Designjet 510?
Description states that the belt is 42 inches and will work on a HP Designjet 510–this is incorrect. The belt that was shipped to me is 60 inches. The old belt measures 42 inches.
What does the blue lever on the HP Designjet 500 do?
Pinch arm lever for the HP Designjet 500, 500ps, 510, 800, 800ps. This relates to the blue lever for loading the paper. The installation manual is included. This concerns the flat cable of the ink carriage. The manual is included for installation. This concerns the flat cable of the ink carriage.
Which power supply for the HP Designjet 510 and 510PS?
The Jetdirect 635N is also often used as a substitute for the Jetdirect 610N, Jetdirect 615N and Jetdirect 620N. This is the power supply for the HP Designjet 510 and 510ps. The switch is included in this spare part. The formatter board / HPGL/2 is an addition to the HP Designjet 510 series and solves error 05: 10.
